Necktie Cubby

  • Advertise with us
Project by sultanofsawdust posted 07-12-2016 05:51 PM 746 views 3 times favorited 3 comments Add to Favorites Watch

I was looking at my old necktie rack and thought I could improve it. I wanted the ties to be more visually displayed and I also wanted more storage. I drew some sketches from some rough measurements and found out I could essentially double my storage in the same amount of space AND make the tie patterns more visible as well.

I acquired a $5 piece of spalted soft maple from my local sawmill and made the entire cubby (with the exception of the cheap plywood backer) from that one board. The board, plywood, and hardware (hooks) ran cost me less than $20 total, and it took me about 10 hours total to build (designing a bit on the fly and problem-solving, too).

I’ll eventually do a write-up with more pictures of the build process on my Tumblr.

3 comments so far

View ChrisK's profile


1849 posts in 2687 days

#1 posted 07-12-2016 06:11 PM

Good idea and nice looking to boot.

-- Chris K

View Richard's profile


1912 posts in 2295 days

#2 posted 07-12-2016 09:02 PM

Looks really good , But since I don’t own even one necktie it is not going to be copied by me. :)

View Darren's profile


50 posts in 1931 days

#3 posted 07-12-2016 09:40 PM

Very nice idea, but way too many neck ties for my liking. :-)

-- Darren, KCMO,

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics