LumberJocks

French Rolling Pins walnut/maple

  • Advertise with us
Project by Jim Jakosh posted 07-07-2016 12:19 PM 1112 views 0 times favorited 27 comments Add to Favorites Watch

I have a sale coming up on the 23rd and wanted to have a couple more rolling pins ready for it.
They were made from a layup of walnut and maple. They are 1 7/8” diameter and 20” long and I put more taper on the ends of this pair. I finished them with Behandla salad bowl finish.

Cheers, Jim

-- Jim Jakosh.....Practical Wood Products...........Learn something new every day!! Variety is the Spice of Life!!





27 comments so far

View Andy's profile

Andy

208 posts in 288 days


#1 posted 07-07-2016 12:40 PM

Nice rolling pins. I like those better than your last ones.

-- Andy Smith https://www.etsy.com/shop/xrayhardwoods

View doubleDD's profile

doubleDD

5217 posts in 1504 days


#2 posted 07-07-2016 12:48 PM

These look to be a winner. Nice added feature with the maple. I’m still a traditional rolling pin guy but these may get their attention. Good luck.

-- Dave, Downers Grove, Il. -------- When you run out of ideas, start building your dreams.

View kiefer's profile

kiefer

4881 posts in 2128 days


#3 posted 07-07-2016 01:02 PM

Nice design Jim
They will sell just by looks .

Klaus

-- Kiefer https://www.youtube.com/user/woodkiefer1/videos

View bushmaster's profile

bushmaster

1348 posts in 1743 days


#4 posted 07-07-2016 01:24 PM

yes these look better, my favorite project to give away and I do sell some, I use them and find fr my self a smaller flat area work better, allow more freedom to change directions to put the dough where you want it for square corners. Even a full taper works well.

-- Brian - Hazelton, British Columbia

View bushmaster's profile

bushmaster

1348 posts in 1743 days


#5 posted 07-07-2016 01:32 PM

yes these look better, my favorite project to give away and I do sell some, I use them and find for my self a smaller flat area work better, allow more freedom to change directions to put the dough where you want it for square corners. Even a full taper works well. I use the metal lathe with a simple attachment to quickly make an accurate curve, have two patterns to make a full curve and a flat area.

http://lumberjocks.com/projects/98764

-- Brian - Hazelton, British Columbia

View lew's profile

lew

11335 posts in 3216 days


#6 posted 07-07-2016 02:26 PM

Nice rolling pins, Jim! I like the combination of walnut and maple.

-- Lew- Time traveler. Purveyor of the Universe's finest custom rolling pins.

View Blackie_'s profile

Blackie_

4531 posts in 1973 days


#7 posted 07-07-2016 02:44 PM

You’re getting some use out of that lathe aren’t you Jim? :)

-- Randy - If I'm not on LJ's then I'm making Saw Dust. Please feel free to visit my store location at http://www.facebook.com/randy.blackstock.custom.wood.designs

View tyvekboy's profile

tyvekboy

1335 posts in 2474 days


#8 posted 07-07-2016 03:47 PM

Nice rolling pins. I’ve got to try that some time.

-- Tyvekboy -- Marietta, GA ………….. one can never be too organized

View Jim Jakosh's profile (online now)

Jim Jakosh

17130 posts in 2566 days


#9 posted 07-07-2016 04:41 PM

Thank you all for the nice comments. I like these much better with the bigger taper.

Hi Keith. You sure make some classy rolling pins. I like your setup!! I have a Southbend metal lathe with a taper shoe on it and it might be able to be set up with a big curve to follow, too. But, I have a duplicating attachment for a wood lathe that I have never used. I was going to get it set up on my Nova lathe to cut baseball bats. In fact, I bought a new Louisville Slugger for a pattern. This continuous curve on a rolling pin would be a natural for it
I don’t roll out dough to know enough about ease of use. I will have to find some bakers to see what they prefer. I can see how the full curve would let you change direction easily. I though a good flat area would make for a better uniform thickness of the dough. This one has a 10 wide flat.

Hi Lew. I have not put a Celtic knot in one yet but I think I know what I did to screw up the one I put in a cane. I have a piece of maple coming today for a second shot at it!

Hi Randy. I sure try to get on that lathe every day for something. I’m going there in a few minutes.

Cheers, Jim

-- Jim Jakosh.....Practical Wood Products...........Learn something new every day!! Variety is the Spice of Life!!

View majuvla's profile

majuvla

9120 posts in 2328 days


#10 posted 07-07-2016 05:18 PM

I think you will sell them ’’no sweat’’.

-- Ivan, Croatia, Wooddicted

View peteg's profile

peteg

3853 posts in 2284 days


#11 posted 07-07-2016 09:06 PM

Your contrast spline sets these up as a real classy item Jim, very nice :)
cheers
pete

-- Pete G: If you always do what you always did you'll always get what you always got

View Joe Lyddon's profile

Joe Lyddon

9432 posts in 3513 days


#12 posted 07-07-2016 09:57 PM

They sure look nice…

Hope they work a SELL!

Good luck!

-- Have Fun! Joe Lyddon - Alta Loma, CA USA - Home: http://www.WoodworkStuff.net ... My Small Gallery: http://www.ncwoodworker.net/pp/showgallery.php?ppuser=1389&cat=500"

View Jim Jakosh's profile (online now)

Jim Jakosh

17130 posts in 2566 days


#13 posted 07-07-2016 10:12 PM

Thanks Ivan, Pete and Joe. I hope they sell too. Cheers, Jim

-- Jim Jakosh.....Practical Wood Products...........Learn something new every day!! Variety is the Spice of Life!!

View HillbillyShooter's profile

HillbillyShooter

5811 posts in 1753 days


#14 posted 07-08-2016 12:13 AM

Nice! Should attract a lot of interest. Good luck.

-- John C. -- "Firearms are second only to the Constitution in importance; they are the peoples' liberty's teeth." George Washington

View Bob Collins's profile

Bob Collins

2316 posts in 3145 days


#15 posted 07-08-2016 12:32 AM

Very nice looking pins Jim, the taper is better than your previous ones.

-- Bob C, Australia. I love sharing as long as it is not my tools

showing 1 through 15 of 27 comments

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com