| Project by norwood | posted 1239 days ago | 1042 views | 0 times favorited | 2 comments |  |
 |
I was bored today so I made a shop knife from a scrap of mahogany and an old sawzall blade used the lathe for the handle and a copper fitting with an aluminium plate for the bolster I broke three practice handles before making the final one. I wasn’t to concerned with the final blade finish as it will be used as a glue bottle gunk remover and to whittle little wedges as new glue caps
-- of all the things Ive lost in life i miss my mind the most
| Pin It |
2 comments so far
Tom O'Brien
home | projects | blog
71 posts in 2115 days
#1 posted 1239 days ago
Looks pretty good for a gunk remover.
-- Every project is a learning opportunity, every error a design opportunity
Dennisgrosen
home | projects | blog
10854 posts in 1285 days
#2 posted 1239 days ago
bored ha! then I look forward to the day you are not
welcome to L J
Dennis
Have your say...