LumberJocks

Buffet Table Tray

  • Advertise with us
Project by Daniel posted 07-05-2016 06:32 PM 578 views 0 times favorited 2 comments Add to Favorites Watch

I took some time out of the two big builds I am in the middle of to do something fun and build this tray for the wife. She wanted a tray for her buffet table to keep from spilling stuff on it. I had some small pieces of rough cut blue stained pine that were going to be shelves but they had some issues so they wouldn’t work for that project. I ripped the pieces into 2.5” wide strips, biscuit joined them together. Then cut a rough cut 2×4 I had laying around, planed it down to 3/4” thick, cut them to length and mitered the corners. Glued and brad nailed the side boards on. Used the router on all the edges and the corners. I finished it with a beeswax and orange oil finish, to keep the natural look. There is a piece of glass in it, it wasn’t square so it does float in the tray a bit but that will make getting it out easy which is good. The tray is 13”x18”.





2 comments so far

View recycle1943's profile

recycle1943

1158 posts in 1089 days


#1 posted 07-06-2016 10:25 AM

nice tray Daniel

-- Dick, Malvern Ohio - Your imagination is your only holdup

View Daniel's profile

Daniel

7 posts in 1591 days


#2 posted 07-25-2016 04:22 PM

Thank you. I appreciate your comment. I will be adding handles to it, just haven’t figured out what would look good on it. If you have any ideas feel free to add your input.

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com