LumberJocks

Drunken cutting board

  • Advertise with us
Project by Tom posted 06-28-2016 05:21 PM 445 views 0 times favorited 1 comment Add to Favorites Watch
Drunken cutting board
Drunken cutting board No picture No picture No picture No picture No picture
Zoom Pictures

Saw this done on a YouTube video and decided to give it a try. I learned that you need to have the band saw blade adjusted correctly otherwise it wanders and messes up the cuts. Fixed that after the first cut/glue up and the second part went much smoother. Now I just need to get the glue up so they’re flatter when done.





1 comment so far

View diverlloyd's profile

diverlloyd

1160 posts in 1255 days


#1 posted 06-29-2016 09:51 PM

Nice job the look like checkered flags. On some I have done if the cuts wandered and made a gap I would glue them together and run it through the saw again on the saw line to make them match cut. One I had to do three or four times to get it to fit up well.

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com