Finally made a clamp rack….

  • Advertise with us
Project by KevinVan posted 12-28-2009 09:00 AM 3384 views 7 times favorited 13 comments Add to Favorites Watch

Well I needed some shop time and I figured I put this rack off long enough.

Ripped 4 strips of oak ply 3” wide.

I ran ½ dadoes on 2” centers. on two of them.

The relief for the pipe clamps were 1” wide dadoes.

Glued and Screwed the top combed board to the bottom rip and fastened both plumb to the wall.

-- ALS IK KAN “to the best of my ability,”

13 comments so far

View Bud's profile


191 posts in 2907 days

#1 posted 12-28-2009 10:36 AM

Very nice and clean.

-- Bud -

View spud72's profile


321 posts in 2463 days

#2 posted 12-28-2009 02:47 PM

Nice, well organized. Thanks for the idea. I need to do the same in my shop


-- Guy,PEI

View RetiredCoastie's profile


999 posts in 2152 days

#3 posted 12-28-2009 03:50 PM

Nice rack!

-- Proud Supporter of Homes For Our Troops

View Eric in Florida.'s profile

Eric in Florida.

3736 posts in 2545 days

#4 posted 12-28-2009 03:51 PM

Some day my shop will be that clean…............
Nice clamp rack Kev.

-- Nothing is particularly hard if you divide it into small jobs ~ Henry Ford

View Sam_Fox's profile


29 posts in 2173 days

#5 posted 12-28-2009 04:57 PM

Wow, you have so many clamps some still have the tags on them!!! I’m so Jealous!!

View sras's profile


4155 posts in 2098 days

#6 posted 12-28-2009 06:19 PM

Looks great! I see only one problem – what are you going to do when you buy more clamps? You can never have enough clamps – but you’re getting close!

-- Steve - Impatience is Expensive

View AJJ's profile


75 posts in 2117 days

#7 posted 12-28-2009 06:55 PM

Excellent job. Your whole shop is on wheels, that is also a plus.

-- AJJ, Eugene OR

View WayneC's profile


12611 posts in 3066 days

#8 posted 12-28-2009 07:02 PM

Very nice….

-- We must guard our enthusiasm as we would our life - James Krenov

View Jordan's profile


1380 posts in 2094 days

#9 posted 12-28-2009 07:51 PM

I’d love to have even a quarter of those clamps!!! You have a small fortune there!


View a1Jim's profile


113452 posts in 2546 days

#10 posted 12-28-2009 08:12 PM

Nice job
The more clamps the better I think I’m up to about the 200 mark and still run out on some jobs.

-- Custom furniture

View KevinVan's profile


91 posts in 2120 days

#11 posted 12-28-2009 10:14 PM

Thanks guys..

I plan to get some shorter parallel clamps in the future.

The cheapo Harbor Freight clamps will be phased out.
They served me well for what they’re worth.

Once you have quality clamps like Jorgensen, it’s hard to go back.

-- ALS IK KAN “to the best of my ability,”

View Beginningwoodworker's profile


13347 posts in 2642 days

#12 posted 12-29-2009 06:04 PM

Nice looking job, great job on the clamp rack.

View TomFran's profile


2944 posts in 2963 days

#13 posted 01-01-2010 11:25 PM

Looks great! You can’t beat a little organization in the shop.

-- Tom, Surfside Beach, SC - Romans 8:28

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics