|Project by RJ2||posted 06-27-2016 11:25 PM||1206 views||3 times favorited||1 comment|
Saw a rack similar and made this one up a little different. Cut the 4” PVC to length , clamped a straight block to side and ripped a slot into pieces on table saw , then stacked in a row butted flush , hot glued the rip cuts upside down with hot glue , attached a piece of Angle iron to top, with 1/2” rivets painted black, tap ones to column. I have about
12 cordless drills and impacts , man this is really a
Nice addition , to keeping them organized. . I use to stick the drill with bit in chuck
In small pipes I had welded , snapped off to many small drill bits , bumping them . There mounted right next to my spin around , swing around , live powered angle grinder rack mount. I think I’m just getting to organized.
-- RJ, Tampa Fl, RJMETALWOODS.COM