LumberJocks

Monitor Stand

  • Advertise with us
Project by CMorgan posted 1699 days ago 2325 views 11 times favorited 11 comments Add to Favorites Watch

I was tired of having my monitors at work propped up on reams of printer paper so I made this monitor stand out of quarter sawn Sapele and Hard Maple. The finish is from an article I had from a Fine Woodworking magazine which uses a light coat of bolied linseed oil followed by shellac. Very easy to apply and turned out nice.





11 comments so far

View Jeison's profile

Jeison

947 posts in 1734 days


#1 posted 1699 days ago

looks awesome!

-- - Jei, Rockford IL - When in doubt, spray it with WD-40 and wrap it with duct tape. The details will attend to themselves.

View zlatanv's profile

zlatanv

689 posts in 1861 days


#2 posted 1699 days ago

Very nice color combo and design, bet your getting requests for more.

-- Z, Rockwall, TX

View Monty Queen's profile

Monty Queen

1585 posts in 1878 days


#3 posted 1699 days ago

Awsome job, looks real good.

-- Monty Q, Columbia, South Carolina.

View FRB's profile

FRB

13 posts in 1852 days


#4 posted 1699 days ago

Nice clean lines and Sapele and Hard Maple great combination.

View a1Jim's profile

a1Jim

112011 posts in 2204 days


#5 posted 1698 days ago

Wow outstanding wonderful stand and cool design.

-- http://artisticwoodstudio.com Custom furniture

View sras's profile

sras

3813 posts in 1756 days


#6 posted 1698 days ago

Well done! Nice design – I like the details…

-- Steve - Impatience is Expensive

View WoodyWoodWrecker's profile

WoodyWoodWrecker

171 posts in 1878 days


#7 posted 1698 days ago

Thanks for showing this. That is the same setup I have here at home. I’m using 3 volumes of an encyclopedia set under one monitor and an old cheap plastic stand under the other one. I may try this. I’ll add it to my favorites. Thanks again. Looks great.

-- You always have tomorrow to stop procrastinating.

View Beginningwoodworker's profile

Beginningwoodworker

13337 posts in 2299 days


#8 posted 1698 days ago

Nice work!

-- CJIII Future cabinetmaker

View Broglea's profile

Broglea

665 posts in 1717 days


#9 posted 1698 days ago

Beautiful and functional. A can’t miss project.

View Mcnervy's profile

Mcnervy

93 posts in 1730 days


#10 posted 1565 days ago

Thats great
I have the same two monitor setup
I have just delt with the neck pain of looking down
Now I have an Idea

-- Bennett; If it can't be fixed with a hammer its an electical problem

View clafollett's profile

clafollett

114 posts in 1281 days


#11 posted 299 days ago

I know this is a very old post but I found this doing a search for computer monitor stand. What a wonderful job. I love the contrasting colors and the through tenons on the legs. Very well done.

-- Don't mind me, I'm just soaking up knowledge

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase