|Project by jase||posted 06-13-2016 06:33 PM||604 views||0 times favorited||1 comment|
Over in korea there isn’t much selection for lumber without paying alot. So i found some used pallets, pulled the nails and ran the boards through a planer. End result is what you see here, although i’m disappointed that the red ends of the gun barrel and wrench were almost erased when i sprayed the clear lacquer at the end. My guy was very happy.
The easiest method I’ve found to cut the scythe was to find an image I like, save the image and edit it with microsoft paint and white out the edges of the shape. Then i held up a piece of paper and taped it to my computer monitor, and the white edge outline will shine through the paper. I then used a pencil to trace the shape and that was it.
-- 'If you got any, you got plenty'