LumberJocks

Walnut humidor

  • Advertise with us
Project by bob101 posted 06-09-2016 12:45 AM 606 views 0 times favorited 9 comments Add to Favorites Watch

Black walnut with cherry edge banding , semi gloss lacquer finish. Spanish cedar interior with adjustable dividers. Measures 13×10x7.

-- rob, ont,canada





9 comments so far

View AJ1104's profile

AJ1104

197 posts in 1053 days


#1 posted 06-09-2016 02:07 AM

Nice looking humidor. Great job w the cherry banding.

-- AJ, Long Island. New York

View bob101's profile

bob101

283 posts in 2844 days


#2 posted 06-09-2016 02:15 AM

Thanks

-- rob, ont,canada

View Jerry's profile

Jerry

1682 posts in 1042 days


#3 posted 06-09-2016 02:36 AM

Another absolute beauty Rob. I see that you are using lock miter joints. I’ve got the bits AND the setup blocks, but the setup is crazy difficult and my ends keep getting blown out. How do you manage it?

-- There are good ships and there are wood ships, the ships that sail the sea, but the best ships are friendships and may they always be. http://geraldlhunsucker.com/

View majuvla's profile

majuvla

8389 posts in 2261 days


#4 posted 06-09-2016 05:48 AM

So simple, yet so awesome design.Those three wood colours look great.

-- Ivan, Croatia, Wooddicted

View Mikesawdust's profile

Mikesawdust

254 posts in 2433 days


#5 posted 06-09-2016 11:20 AM

Jerry, I cant see where he used locking miter joints but I understand your issues. The setup usually just takes me a while of trial and error with scraps of the same thickness. for blowout, there are two choices that work 1. following with a scrap piece held tightly against the work piece, this moves blowout to the scrap 2. cutting your wood wide and trimming it down to remove the blown area. I usually go with option one, you can reuse the same scrap as long as you are doing the same cut and it will support the grain of the uncut area, clamping them together works well.

View bob101's profile

bob101

283 posts in 2844 days


#6 posted 06-09-2016 12:25 PM

I cut my pieces oversized and I have a 90 degree plywood backer sled I use while milling the joint on the router table. And yes the setup is a pain in the butt .the other thing I have learned is that multiple passes taking small amount of material per pass really decreases the blow out issues at the ends, and yields a nicer joint.

-- rob, ont,canada

View helluvawreck's profile

helluvawreck

22553 posts in 2260 days


#7 posted 06-09-2016 02:36 PM

This humidor turned out nicely.

helluvawreck aka Charles
http://woodworkingexpo.wordpress.com

-- If a man does not keep pace with his companions, perhaps it is because he hears a different drummer. Let him step to the music which he hears, however measured or far away. Henry David Thoreau

View Mean_Dean's profile

Mean_Dean

4867 posts in 2541 days


#8 posted 06-09-2016 11:35 PM

Great looking humidor—I like the walnut/cherry combo!

-- Dean

View Jerry's profile

Jerry

1682 posts in 1042 days


#9 posted 06-10-2016 01:45 AM



I cut my pieces oversized and I have a 90 degree plywood backer sled I use while milling the joint on the router table. And yes the setup is a pain in the butt .the other thing I have learned is that multiple passes taking small amount of material per pass really decreases the blow out issues at the ends, and yields a nicer joint.

- bob101


Rob, thanks so much for the intel. I will try those techniques.

-- There are good ships and there are wood ships, the ships that sail the sea, but the best ships are friendships and may they always be. http://geraldlhunsucker.com/

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com