|Project by Alask||posted 06-04-2016 01:34 AM||699 views||2 times favorited||6 comments|
Hello fellows at this time I would like to share my latest wood project.My first chair.All by myself.
Few weeks ago I was thinking in a gift to my wife’s birthday.One gift made by myself.One night the idea came through and I quickly transfered the idea to paper.
The main idea is an “A” letter stylized chair (remember an “A” letter ) because her name is Ana.
See the main steps below.
The first draw
The 3D model
I made a rough mock-up to check dimensions and comfort.
In this case I used a handsaw for cut.
The rough cut and the final result
The other cut using the same way and final result
Shaping the big hole and round the edges
Here the dowels and the extra wood to increase the glue area.I screwed the seat on these two litte bars.
Shaping the arms
The dry fit only using the screw (24 screws)
The arms add strenght because they help to interlock pieces (and complete the “A” letter)
The final results
Very stable.She is on the corner without support below,All support from back piece.
Carpet for slide easily
Thanks for attention