or Join Now!
I plan to put this to good use…
-- ToGoMan ------ "No ONE of us knows as much as ALL of us." (anon.) ----
Dec 19, 2009
home | projects | blog
101 posts in 2210 days
Preview this project card
1136 posts in 2424 days
#1 posted 12-20-2009 07:42 AM
that is interesting… how much that set you back?
-- San Diego, CA
10262 posts in 2954 days
#2 posted 12-20-2009 08:11 AM
And where did you find it?
-- Gary - Never pass up the opportunity to make a mistake look like you planned it that way - Tyler, TX
432 posts in 2072 days
#3 posted 12-20-2009 08:14 AM
I have never seen Cheetah wood around these parts, but I was very lucky to come upon some Elephant wood. I made a trunk out of it.
-- Style is simple, but not my execution of it.
11775 posts in 2654 days
#4 posted 12-20-2009 08:26 AM
I think it’s actually Leopardwood : ) Your “wood” looks like an aerial view of a Gummy Bear Convention.
-- I'm absolutely positive that I couldn't be more uncertain!
#5 posted 12-20-2009 08:32 AM
I think it’s actually Leopardwood : ) I googled “cheetahwood” and it led me to an unhappy forum regarding Tiger Woods !!
#6 posted 12-20-2009 08:52 AM
That could be Tiger Wood…a spot shows up every time…
113449 posts in 2543 days
#7 posted 12-20-2009 08:56 AM
Hmmm I think were being spoofed ????
-- http://artisticwoodstudio.com Custom furniture
10850 posts in 2081 days
#8 posted 12-20-2009 02:21 PM
I´m with you a1Jim it´s look paintet some how
15721 posts in 2155 days
#9 posted 12-20-2009 02:58 PM
Aistins hardwood had some wood that look similar to this . Very nice!
-- Ken, "Everyday above ground is a good day!"
187 posts in 2081 days
#10 posted 12-20-2009 04:05 PM
Is making a trunk out of elephant wood a pun or what. Looks like cheetah would make a good inlay, or making pens.
-- Dave from "The Sawdust Shed"
949 posts in 2350 days
#11 posted 12-20-2009 05:41 PM
C’mon guys. You can see it’s two boards edge joined with the pattern overlapping. He’s pulling our legs.
-- Dale Manning, Carthage, NY
#12 posted 12-20-2009 05:45 PM
that´s right and it´s name is cheating wood right ??
Frankie Talarico Jr.
353 posts in 2323 days
#13 posted 12-20-2009 07:36 PM
IMHO I think its spoof also. The two boards are joined at the center yet the pattern is perfect along this joint. In my years of finish this can be accomplished one of two ways.
1. A chemical reaction with A new finish overlaying an existing finish.
2. Had some kind of paper pattern and used spray stain.
I dont think I ever even heard of cheetah or leapord wood before. Sounds like someone needs a new set of muffler bearings. along side thier order of headlight fluid!
Prove me wrong but I think it’s someone pulling our arm and leg! You did get me to come look though. I guess you did get that much out of me.
-- Live by what you believe, not what they want you to believe.
#14 posted 12-20-2009 08:38 PM
Okay, Ladies and Gents… Time for me to come a little clean…
Only a little…
There is NO paint or stain involved in this wood’s appearance…
There is NO paper pattern involved…
There is NO chemical reaction involved, though that’s not too far-fetched…
tom1 did get the maple part right, though…
I’ll come completely clean once it’s put into it’s final form – some time this week.
1156 posts in 2334 days
#15 posted 12-20-2009 08:56 PM
On edge the spots don’t carry through, must be printed on with something
-- Carpenter assembles with hands, Designer builds with brains, Artist creates with heart!
View all comments »
showing 1 through 15 of 21 comments
Go to Pulse page »
©2015 Verticalscope Inc. All Rights Reserved. |
Terms of Service
DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.
Latest Projects |
Latest Blog Entries |
Latest Forum Topics