LumberJocks

Greene and greene tv stand

  • Advertise with us
Project by Sumthinlikeawoodninja posted 05-30-2016 12:46 AM 1249 views 14 times favorited 16 comments Add to Favorites Watch

I first saw this design on ljs the gentlemans user name is skeys. This project was a real skillbuilder. I used hand tools exclusively for all of the jointery and almost all of the milling. It was perfect timing to break in my new jointer plane. I even opted to go the handplane route to make the underside chamfer on the top which. One small hurdle to overcome was how to create the groove on the top door stile. I decided to go after it with chisel and router plane. As for the materials the cherry used for this project was very co operative no real issues with stability. Which was a concern with the case panels being 15” in width and the top being around 19”.
As with anything greene and greene the pillowed plugs can try your patience but they look so cool once they are done (: Thanks for having a look

-- Jason,WI "Whether you believe you can or believe you can't you are right!"





16 comments so far

View Bud_3's profile

Bud_3

647 posts in 618 days


#1 posted 05-30-2016 12:54 AM

I like it. It has a nice design and colors fit perfectly.

View pottz's profile

pottz

714 posts in 378 days


#2 posted 05-30-2016 03:41 AM

im a big g & g fan and i gotta say you killed this one brother,it rocks,great job.

-- sawdust the bigger the pile the bigger my smile-larry,so cal.

View Sumthinlikeawoodninja 's profile

Sumthinlikeawoodninja

41 posts in 241 days


#3 posted 05-30-2016 03:48 AM

Thanks pottz! I cant take credit for the design but those were my exact thoughts when i first saw this design.

-- Jason,WI "Whether you believe you can or believe you can't you are right!"

View majuvla's profile

majuvla

8390 posts in 2262 days


#4 posted 05-30-2016 10:11 AM

Realy incredible table/cabinet, beautiful design. Those ’’finger’ joints with ‘touch’ of G&G and dovels are great. Me also made one cabinet with this type of joinery. I must admit it’s very sturdy and reliable.

-- Ivan, Croatia, Wooddicted

View Tom Regnier's profile

Tom Regnier

107 posts in 1941 days


#5 posted 05-30-2016 11:11 AM

Great work with the hand tools!

View david38's profile

david38

2318 posts in 1737 days


#6 posted 05-30-2016 11:34 AM

beautiful piece

View JimYoung's profile

JimYoung

209 posts in 981 days


#7 posted 05-30-2016 01:25 PM

A+

-- -Jim, "Society is well governed when its people obey the magistrates, and the magistrates obey the law." -- Solon

View skogie1's profile

skogie1

94 posts in 757 days


#8 posted 05-30-2016 02:20 PM

I love it. What was your process with the legs?

View Sumthinlikeawoodninja 's profile

Sumthinlikeawoodninja

41 posts in 241 days


#9 posted 05-30-2016 02:55 PM

Thank you! The leg blanks were 2”×2.75” I made a few templates to chose from. The one i went with had the apex land in the center of the case. The leg curves from both sides. They are 1 3/8” at their narrowest point. The top and bottom few inches were scribed with a compass.

-- Jason,WI "Whether you believe you can or believe you can't you are right!"

View MykeP's profile

MykeP

5 posts in 122 days


#10 posted 05-30-2016 04:47 PM

That is a great piece. I really like the figure on the front of the doors. Adds a nice accent to the overall design.

View helluvawreck's profile

helluvawreck

22555 posts in 2261 days


#11 posted 05-30-2016 06:01 PM

This TV stand turned out nicely.

helluvawreck aka Charles
http://woodworkingexpo.wordpress.com

-- If a man does not keep pace with his companions, perhaps it is because he hears a different drummer. Let him step to the music which he hears, however measured or far away. Henry David Thoreau

View Gary's profile

Gary

1202 posts in 3718 days


#12 posted 05-30-2016 09:33 PM

This is a fantastic piece of furniture; all the better for using only hand tools.

-- Gary, Florida. http://www.penturners.org/forum/f70/servicepens-2014-a-111967/

View Mean_Dean's profile

Mean_Dean

4867 posts in 2541 days


#13 posted 05-30-2016 11:58 PM

Great looking G&G TV cabinet! You chose some nice details, without overdoing it!

-- Dean

View skeys's profile

skeys

14 posts in 923 days


#14 posted 05-31-2016 12:10 AM

Hey Jason, that really looks great. All hand tools adds to it.

-- Scott K., Virginia https://www.etsy.com/shop/HaresEarDesigns

View Ken90712's profile

Ken90712

16831 posts in 2583 days


#15 posted 06-01-2016 08:49 AM

Love G & G great work on this

-- Ken, "Everyday above ground is a good day!"

showing 1 through 15 of 16 comments

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com