|Project by Lee||posted 05-24-2016 10:42 PM||1033 views||7 times favorited||4 comments|
I got the plans for this panel saw from woodsmithshop.com. they were pretty straight forward and easy to follow. The first pic shows the saw loaded with a sheet of osb, the second shows it un loaded and you can see part of the “A” frame I mounted it to. This “A” frame doubles as a sheet goods storage rack, I didn’t want to take up 10 feet of wall space for the saw so I mounted it on the sheet goods rack. The third pic shows the carriage that slides both horizontally and vertically on six ball bearings. The fourth pic shows the spring loaded counter balance that offsets the weight of the saw so it slides up and down with little effort. The last is just another view of the carriage assembly. The first test cut with it was off by less than 1/16” in 8 feet which is good enough to break down full sheets into something more manageable in my opinion. Now to start using it to build new shop cabinets.
-- Colombia Custom woodworking