|Project by LoganN||posted 05-24-2016 08:34 PM||627 views||0 times favorited||7 comments|
This is a maple Burl entry table that is made to match a coffee table I’ve also built. The legs are 2” thick walnut with a cherry stretcher. The stretcher is supported through the legs with a 3/4” aluminum bar and the front leg has a 25 degree rake to it. The legs are cut from the same piece of walnut and the grain goes across all 3 legs. The base is finished with danish oil and lacquer.
The burled top is filled with an ebony colored filler and sanded to 320. This was then coated in Danish oil and a varying blend of wipe-on poly was used to build up a good gloss coat
Pictures of the coffee table will be uploaded later today
Comments and thoughts are always welcome! Thanks for looking