LumberJocks

Wine Bottle Holder

  • Advertise with us
Project by bbutler36 posted 1717 days ago 931 views 3 times favorited 2 comments Add to Favorites Watch
Wine Bottle Holder
Wine Bottle Holder No picture No picture No picture No picture No picture
Zoom Pictures

This is a Christmas gift that I made for my bosses wife. The woods are purpleheart and maple and finished with Arm-R-Seal Satin. The piece measure 15” long x 9” high x 5” wide and the planks are 1/2” thick.

The joint was cut at a 15° angle using a dado blade. I placed a little bit of glue and three screws to reinforce the joint. It turned out quiet strong! I wish I would of made the base a little thicker to give it some weight, both physically and visually.

Last Christmas I made her a cutting board using purpleheart and maple and thought that it would be a nice touch to use the same woods this year.

Would love to hear any thoughts on my project. Good or bad!!





2 comments so far

View hootr's profile

hootr

183 posts in 1980 days


#1 posted 1717 days ago

looks good
i think i’ll try this but leave the joint free and add a cribbage board in the base

-- Ron, Missouri

View Cory's profile

Cory

723 posts in 2053 days


#2 posted 1717 days ago

Nice work!

-- The secret to getting ahead is getting started.

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase