LumberJocks

Hollow turning saved

  • Advertise with us
Project by Mark posted 05-18-2016 03:12 PM 593 views 0 times favorited 7 comments Add to Favorites Watch

Hollow turned vessel. Cherry and Walnut The last picture shows the extent of the void which included some rot.
I filled the void with a mix of left over coffee grounds and epoxy. Added a Walnut ring. I cut a trough between the 2 woods and filled it with copper filings and CA glue. File the copper to size & sand to 600g. 2 coats Min Wax Teak Oil and 2 of paste wax.
My thanks to Druid, Snowbeast and wiki for their suggestions. Thanks fer looking’.

-- Mark





7 comments so far

View Druid's profile

Druid

1302 posts in 2257 days


#1 posted 05-18-2016 07:20 PM

Well Mark, that’s a great save, and the final result is beautiful. I like the idea of the copper filings as an additional point of interest.
Well done.

-- John, British Columbia, Canada

View bushmaster's profile

bushmaster

1353 posts in 1744 days


#2 posted 05-18-2016 08:00 PM

Looks great, One way to use coffee grounds,

-- Brian - Hazelton, British Columbia

View Snowbeast's profile

Snowbeast

61 posts in 800 days


#3 posted 05-18-2016 11:23 PM

Much nicer than the first time we saw it!

Amazing what you can make out of firewood.

View Roger's profile

Roger

19867 posts in 2266 days


#4 posted 05-19-2016 03:10 AM

Super nice save

-- Roger from KY. Work/Play/Travel Safe. Keep your dust collector fed. Kentuk55@yahoo.com

View helluvawreck's profile (online now)

helluvawreck

23144 posts in 2328 days


#5 posted 05-19-2016 02:29 PM

That a wonderful save. Nice work.

helluvawreck aka Charles
http://woodworkingexpo.wordpress.com

-- If a man does not keep pace with his companions, perhaps it is because he hears a different drummer. Let him step to the music which he hears, however measured or far away. Henry David Thoreau

View TysonK's profile

TysonK

126 posts in 1264 days


#6 posted 05-19-2016 05:23 PM

How did you contain the grounds/ epoxy so it could set in the void? Great save, beautiful bowl!

-- -- Tyson

View Bob Collins's profile

Bob Collins

2317 posts in 3146 days


#7 posted 07-15-2016 10:44 PM

Missed this one Mark, great finish and you made a great save. Like the addition of the top ring and the use of coffee grinds and epoxy. Very nice hollow form.

-- Bob C, Australia. I love sharing as long as it is not my tools

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com