Saw stop (help me here)

  • Advertise with us
Project by PaBull posted 05-14-2016 11:21 PM 1801 views 2 times favorited 3 comments Add to Favorites Watch

Can i call this a “saw stop”?

My next project is the table saw dove tail jig from Rocket. For this jig I need 2 stops in the 3/4 grooves, or T-tracks in the table saw to stop the jig in time, so I will not cut through the 2×4 blocks.

I used some Baltic birch, and some nuts and bolts from LOWES.

1. Saw stops, side view
2. Saw stops, straight view
3. Hardware used, from LOWES.
4. Knows made on drill press
5. Hardware into knobs
6. How the stop sits in the saw groove

Thanks for checking in.

-- rhykenologist and plant grower

3 comments so far

View kiefer's profile


5620 posts in 2839 days

#1 posted 05-15-2016 02:38 AM

Here is what I made for my sled runners to stop against and a pair of these may work for you and you can have them permanently attached to the saw and then just cut a couple of strips to fit to get the jig to stop at the right place .

-- Kiefer

View Dutchy's profile


3120 posts in 2340 days

#2 posted 05-15-2016 06:14 AM

Simple and …...great.


View PaBull's profile


957 posts in 3837 days

#3 posted 05-17-2016 12:13 AM

Kiefer you have a nice saw stop there yourself! Thanks for your comment.

Dutchy my Dutch (Hollands) is not what it used to be. Maar bedankt voor je vriendelijke woorden.

-- rhykenologist and plant grower

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics