|Project by greatview||posted 12-12-2009 08:46 PM||3171 views||6 times favorited||4 comments|
Here’s the really simple table and fence I made for my drill press. The material is 3/4 inch MDO which I can find at my locat lumber yard. It’s bolted to the metal table with 4 flat head bolts recessed into the MDO. The adjustment is by way of T-bolts that ride in a channel I milled with a 3/8 straight bit and then the bit pictured which does a really neat job. The dimensions are 34” long by 14” deep which came from stock I had on hand. I didn’t bother with special stop blocks as it is trivial to clamp a block to the fence. There’s no finish but the paper surface is quite durable. I broke the corners with a round over bit.
-- Tom, New London, NH