3 Bottle Wine Bottle Holder

  • Advertise with us
Project by Cory posted 12-12-2009 06:42 PM 3352 views 16 times favorited 6 comments Add to Favorites Watch

This is a three bottle wine bottle holder that I just finished as a Christmas present. I wanted the holder to be able to hold one, two, or three bottles, which is why I needed to have a base. It’s made from marblewood, which I had never heard of until I was rummaging around at a hardwood dealer. This stuff is VERY hard and was kind of difficult to work with. To join the two pieces I used a sliding dovetail. That took quite a bit of effort and several test pieces, but the end result is very cool. It’s finished with three coats of Watco wipe on poly.

Thanks to everyone who helped me figure out how to join the top and bottom. I couldn’t have done this project without you.


-- The secret to getting ahead is getting started.

6 comments so far

View sidestepmcgee's profile


158 posts in 3923 days

#1 posted 12-12-2009 06:59 PM

cool,I have always wanted to get my hands on some marblewood.I like this design better than the single bottle holder design,because three is always better then one!

-- eric post, tallahassee FL

View Travis Henley's profile

Travis Henley

24 posts in 3288 days

#2 posted 12-12-2009 07:01 PM

I like it a lot, I was looking at the balancing ones and they kinda freak me out I’m afraid they could easily be knocked over by accident and your has a simple but elegant look to it Great job and nice wood choice!

-- Travis Henley, North Carolina,

View Dudley's profile


742 posts in 3458 days

#3 posted 12-12-2009 10:54 PM

Mighty fine. I like it. BZ

-- Dudley Young USN Retired. Sebastian, Fl.

View MsDebbieP's profile


18618 posts in 4359 days

#4 posted 12-12-2009 10:59 PM

well done!!

-- ~ Debbie, Canada (, Young Living Wellness )

View Kristoffer's profile


675 posts in 3414 days

#5 posted 05-02-2010 09:14 PM

Very nice! I’d like to give it a shot, but I’m guessing that the sliding dovetail on an angle isn’t as much fun as it looks.

-- Cheers and God Bless

View Cory's profile


760 posts in 3617 days

#6 posted 05-03-2010 02:23 PM

You know, looking back Kristoffer, it really wasn’t that difficult. I created a couple of wedges to match the angle I wanted then attached them with double sided tape to the piece. A couple of passes on the router table and I was in business. I say go for it, at worst you’ll just have a few pieces of wood for the fire!

-- The secret to getting ahead is getting started.

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics