LumberJocks

Shop tools

  • Advertise with us
Project by JerryS posted 1713 days ago 1697 views 1 time favorited 8 comments Add to Favorites Watch

This bird cage awl and burnisher were made with a kits from Czeck Edge ( you can find them at the same web site ) I’m not totally sure what the wood is , it came from an assortment pack bought at WoodCraft . I think its either Bloodwood or African Paduak , hard to tell from the picture but this wood is bright red. The kits are of the highest quality and all the parts are made in the USA, they were fun little projects to do . The bird cage blank was 1-1/2” x 1-1/2” x 4” the burnisher blank was the same only 6” long .





8 comments so far

View papadan's profile

papadan

1128 posts in 1994 days


#1 posted 1713 days ago

The wood is Padouk, looks real good. Do you have a link to thier web site?

-- Carpenter assembles with hands, Designer builds with brains, Artist creates with heart!

View JerryS's profile

JerryS

221 posts in 2235 days


#2 posted 1713 days ago

Hey Dan I wasn’t sure if links were allowed here but here goes . http://czeckedge.com/ I like that bird cage awl a lot , they offer and regular type awl as well .

View papadan's profile

papadan

1128 posts in 1994 days


#3 posted 1713 days ago

Thanks.

-- Carpenter assembles with hands, Designer builds with brains, Artist creates with heart!

View dustyal's profile

dustyal

1196 posts in 2100 days


#4 posted 1713 days ago

Czeck edge was at the Lie-Nielsen show last month in Frederick, MD. I saw this kit and others… I could have used a good burnisher last night. Enjoyed talking with the folks there.

Nice job making these.

-- Al H. - small shop, small projects...

View Alan's profile

Alan

443 posts in 2029 days


#5 posted 1713 days ago

They look great. I order some stuff from them last week and look forward to checking out my goodies. Any problems or tips you learned while making yours or are they straight forward.

Thanks.

-- Alan, Prince George

View cabinetmaster's profile

cabinetmaster

10874 posts in 2183 days


#6 posted 1713 days ago

Really nice looking. I’ll check out the website too.

-- Jerry--A man can never have enough tools or clamps

View JerryS's profile

JerryS

221 posts in 2235 days


#7 posted 1712 days ago

Alan no problems at all , the Czech Edge kits are first class . I drilled the blanks on the lathe , thats usually how I drill most of my tool handles . The kits have pretty good directions on the back , I made some mock up handles just to see how I would get the different fancy profiles . That was helpful and saved me from wasting good stock . I’m fairly new to turning, mostly a pen turner .

View Alan's profile

Alan

443 posts in 2029 days


#8 posted 1712 days ago

Great. Thanks for the info.

-- Alan, Prince George

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase