LumberJocks

spalted beech hollow form

  • Advertise with us
Project by Ronald G Campbell posted 05-12-2016 12:27 AM 1245 views 0 times favorited 9 comments Add to Favorites Watch

8 inch spalted beech hollow form with an African Blackwood finial. Have been on a roll with the DT3, this should put a stop to that. It is just a hollow form

C and C welcome

Ron

-- Ron Campbell https://www.facebook.com/ronald.g.campbell





9 comments so far

View Mark Wilson's profile

Mark Wilson

2269 posts in 1232 days


#1 posted 05-12-2016 01:07 AM

Stupendous, is a word.

-- Mark

View Jim Jakosh's profile

Jim Jakosh

21481 posts in 3275 days


#2 posted 05-12-2016 01:49 AM

Just a beautiful piece, Ron. I love that spalted beech!!

Cheers, Jim

-- Jim Jakosh.....Practical Wood Products...........Learn something new every day!! Variety is the Spice of Life!!

View Bob Collins's profile

Bob Collins

2577 posts in 3853 days


#3 posted 05-12-2016 06:25 AM

Real nice Ron, the spalting makes it special. Didn’t know you could nominate what should be a DT3, still can’t work out what system they use.

-- Bob C, Australia. Your best teacher is your last mistake.

View Roger's profile

Roger

20949 posts in 2973 days


#4 posted 05-12-2016 01:28 PM

Beee-u-teeeee-ful!

-- Roger from KY. Work/Play/Travel Safe. Keep your dust collector fed. Kentuk55@yahoo.com

View helluvawreck's profile

helluvawreck

32087 posts in 3036 days


#5 posted 05-12-2016 04:28 PM

Ron, this is another beautiful piece.

helluvawreck aka Charles
http://woodworkingexpo.wordpress.com

-- helluvawreck aka Charles, http://woodworkingexpo.wordpress.com

View peterford's profile

peterford

88 posts in 2777 days


#6 posted 05-13-2016 01:16 AM

that is absolutely FANTASTIC ron!!!

-- marshall peterson, north carolina

View John's profile

John

1260 posts in 1439 days


#7 posted 05-14-2016 06:19 AM

Excellent turning Ron, how many years have you been on a lathe?

-- John, Sunshine Coast, BC, Canada.

View dalepage's profile

dalepage

367 posts in 1010 days


#8 posted 05-14-2016 03:33 PM

Outstanding in every regard! The contrasts are perfrect. I wouldn’t let this one out of my house.

-- Dale

View Ronald G Campbell 's profile

Ronald G Campbell

981 posts in 2173 days


#9 posted 05-25-2016 09:22 PM



Excellent turning Ron, how many years have you been on a lathe?

- John

John I started in th 8th grade. I took 45 years off and have back on the lathe for 7 years now

-- Ron Campbell https://www.facebook.com/ronald.g.campbell

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com