LumberJocks

Domino Gaming Table and Folding Chairs (first woodworking project)

  • Advertise with us
Project by DPWoodworking305 posted 05-11-2016 12:40 PM 980 views 0 times favorited 8 comments Add to Favorites Watch

This was my first woodworking project, homemade domino table and 4 matching folding chairs. I made this couple of months ago in my garage and had since applied couple of coats of resin…It came out really good.. I’ll update this post with new pictures showing resin top (once I get the table back from my neighbor who borrowed it for domino tournament that took place like month ago lol). Let me know what do you guys think. As I’m very new at this any feedback, suggestion, criticism is more than welcomed. Thank you guys!

-- D.Pesic





8 comments so far

View ArtMann's profile

ArtMann

140 posts in 281 days


#1 posted 05-11-2016 02:34 PM

The pictures are tiny.

View helluvawreck's profile

helluvawreck

23177 posts in 2332 days


#2 posted 05-11-2016 04:30 PM

I really like this project. It’s a nice design and very practical and you’ve done a fine job on it. It will certainly increase the enjoyment of playing the game. Congratulations.

helluvawreck aka Charles
http://woodworkingexpo.wordpress.com

-- If a man does not keep pace with his companions, perhaps it is because he hears a different drummer. Let him step to the music which he hears, however measured or far away. Henry David Thoreau

View Andy's profile

Andy

208 posts in 292 days


#3 posted 05-11-2016 04:35 PM

Nice gaming table. Since you asked for critisism, one thing that concerns me is how your legs are attached. If they are just screwed in that may be a weak point that with a few accidental kicks could start getting loose on you.

-- Andy Smith https://www.etsy.com/shop/xrayhardwoods

View DPWoodworking305's profile

DPWoodworking305

41 posts in 211 days


#4 posted 05-11-2016 05:21 PM

ArtMann: Thanks for your comments. I just joined the group yesterday and still trying to find my way around it.. I’ll post/replace it with better quality pictures the future.

Charles: Thanks for you comment, really appreciate it.

Andy: Not sure that this was the best way but I used straight top mounting plate to attach legs as well as couple of screws from the sides (I plugged holes with oak dowels).. Any suggestion as to what I should of used instead?

-- D.Pesic

View MustacheMike's profile

MustacheMike

179 posts in 1554 days


#5 posted 05-12-2016 11:44 AM

Very, very nice for first project. I would say you have some natural talent!!!

-- You can trust Mike -" because I will never pull your stash!" See my show weekly at Stumpynubs.com

View DPWoodworking305's profile

DPWoodworking305

41 posts in 211 days


#6 posted 05-12-2016 12:44 PM

Thanks Mike

-- D.Pesic

View david38's profile

david38

2530 posts in 1808 days


#7 posted 05-12-2016 01:31 PM

nice job

View DPWoodworking305's profile

DPWoodworking305

41 posts in 211 days


#8 posted 05-12-2016 02:16 PM

Thanks David

-- D.Pesic

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com