LumberJocks

Routed Jewelry Box

  • Advertise with us
Project by Moe336 posted 05-04-2016 04:09 PM 1917 views 15 times favorited 17 comments Add to Favorites Watch

Routed out Jewelry box. Dark Walnut bottom and top with Maple center. Template gotten from Woodsmith issue #1. I modified it a bit. 10 1/2” X5 1/4 routed 7/8” into 1 1/16” base.





17 comments so far

View ChrisK's profile

ChrisK

1996 posts in 3223 days


#1 posted 05-04-2016 05:05 PM

Very nice looking.

-- Chris K

View Diggerjacks's profile

Diggerjacks

2270 posts in 3281 days


#2 posted 05-04-2016 05:14 PM

Hello Moe336

Nice project
Can you add the dimension please ?

Thanks for sharing

-- Diggerjack-France ---The only limit is the limit of the mind and the mind has no limit

View majuvla's profile

majuvla

13009 posts in 3009 days


#3 posted 05-04-2016 05:16 PM

Good idea for jewelerry. Nice compartments.

-- Ivan, Croatia, Wooddicted

View Moe336's profile

Moe336

19 posts in 1001 days


#4 posted 05-04-2016 05:22 PM

5 1/4 X 10. Base is 5 1/16. Routed down 7/8”.

View helluvawreck's profile

helluvawreck

32083 posts in 3009 days


#5 posted 05-04-2016 09:14 PM

You did a fine job on this jewelry box and I like the design.

helluvawreck aka Charles
http://woodworkingexpo.wordpress.com

-- helluvawreck aka Charles, http://woodworkingexpo.wordpress.com

View Moe336's profile

Moe336

19 posts in 1001 days


#6 posted 05-04-2016 10:45 PM



5 1/4 X 10 1/2. Base is 1 1/16. Routed down 7/8”.

- Moe336


View bibb's profile

bibb

327 posts in 3673 days


#7 posted 05-04-2016 10:48 PM

Very cool idea. I like it!

-- you may only live once, but if you do it right that's all you need katanadesign.com

View clieb91's profile

clieb91

3521 posts in 4077 days


#8 posted 05-05-2016 12:32 AM

Very nice!

CtL

-- Chris L. "Don't Dream it, Be it."- PortablePastimes.com (Purveyors of Portable Fun and Fidgets)

View ravensrock's profile

ravensrock

497 posts in 1784 days


#9 posted 05-05-2016 02:08 PM

Cool jewelry box!

-- Dave, York, PA, Wildside Woodworking

View RootandBranch's profile

RootandBranch

241 posts in 1246 days


#10 posted 05-05-2016 03:47 PM

View Moe336's profile

Moe336

19 posts in 1001 days


#11 posted 05-05-2016 06:10 PM

Base 5 1/4” X 10 1/2” X 1 1/16th. The template was 1” wider and longer to allow for positioning blocks to hold the template. No way to attach a pic here? Sorry for the typo I was half asleep. it was an involved process I got out of WoodSmiths first issue. A 1/4” straight bit with a 5/16” bushing does all the clean out then increasing the bit size thins the walls

View Moe336's profile

Moe336

19 posts in 1001 days


#12 posted 05-05-2016 06:11 PM

Base 5 1/4” X 10 1/2” X 1 1/16th. The template was 1” wider and longer to allow for positioning blocks to hold the template. No way to attach a pic here? Sorry for the typo I was half asleep. it was an involved process I got out of WoodSmiths first issue. A 1/4” straight bit with a 5/16” bushing does all the clean out then increasing the bit size thins the walls

View Moe336's profile

Moe336

19 posts in 1001 days


#13 posted 05-05-2016 06:17 PM



5 1/4 X 10. Base is 5 1/16. Routed down 7/8”.

- Moe336

1 1/16 base not 5.

View Moe336's profile

Moe336

19 posts in 1001 days


#14 posted 05-05-2016 06:22 PM



5 1/4 X 10. Base is 5 1/16. Routed down 7/8”.

- Moe336

1 1/16 base not 5.

View degoose's profile

degoose

7238 posts in 3497 days


#15 posted 05-12-2016 08:29 PM

Nice..

-- Don't drink and use power tools @ lasercreationsbylarry.com.au

showing 1 through 15 of 17 comments

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com