LumberJocks

Cornerpost Dovetail

  • Advertise with us
Project by Monty Queen posted 12-07-2009 04:30 AM 2811 views 3 times favorited 10 comments Add to Favorites Watch

I just completed this box. I bought a Incra Ls positioner system for my router table, and i wanted to play with it. It is not as easy as you think. It takes quite a bit of time setting it up and getting those joints just right. I had a little problem with my router when i had it tighten and it would move on me. I might try a different router with a much easer way to adjust the bit up and down. It was made of African mahogany and red oak. I really enjoy posting my project on this site cause everybody is so kind in their comments. Thanks

-- Monty Q, Columbia, South Carolina.





10 comments so far

View patron's profile

patron

13590 posts in 3156 days


#1 posted 12-07-2009 04:55 AM

monty ,
this is excellent for a first ,

and yes these dovtail setups can be frustrating .

it’s the reverse osmosis inversion thought factor at work !

and a router that stays put is a must .

-- david - only thru kindness can this world be whole . If we don't succeed we run the risk of failure. Dan Quayle

View ratchet's profile

ratchet

1389 posts in 3602 days


#2 posted 12-07-2009 05:05 AM

Really nice incra box! Very appealing & a nice design.
Thanks for sharing.

View webwood's profile

webwood

626 posts in 3065 days


#3 posted 12-07-2009 06:57 AM

very cool monty – red oak is great to work with – you can adjust the joint to accomidate the saw kerf or make an extra joint – anyway – great job – don’t stop now

-- -erik & christy-

View woodworm's profile

woodworm

14437 posts in 3405 days


#4 posted 12-07-2009 09:34 AM

Very very beautiful.

-- masrol, kuala lumpur, MY.

View littlecope's profile

littlecope

3065 posts in 3317 days


#5 posted 12-07-2009 11:29 AM

Great Job with some really beautiful Woods, Monty!! Thanks for sharing!!

-- Mike in Concord, NH---Unpleasant tasks are simply worthy challenges to improve skills.

View a1Jim's profile

a1Jim

116502 posts in 3392 days


#6 posted 12-07-2009 06:34 PM

Nice Work Monty
I see you design evolving with each box looks good.

-- http://artisticwoodstudio.com Custom furniture

View grizzman's profile

grizzman

7836 posts in 3118 days


#7 posted 12-20-2009 01:49 AM

i thought i had you on my buddy list…but was wrong…but fixed that…you did a grand job on this…i love the jointery…the design is very nice as well…i like makin boxes myself….good job monty…

-- GRIZZMAN ...[''''']

View Glen's profile

Glen

116 posts in 2892 days


#8 posted 12-24-2009 09:13 PM

Nice tight dovetails on this box. I really like how the African mahogany on the corners contrasts with the oak. I have yet to master dovetails.

-- Glen

View odie's profile

odie

1691 posts in 3655 days


#9 posted 01-28-2010 07:26 PM

Monty, great job with your first “Incra” box. You left me a message at my home page … sorry for not getting back to you. If you have questions about the Incra jig … ask away.

-- Odie, Confucius say, "He who laughs at one's self is BUTT of joke". http://woodstermangotwood.blogspot.com/ (my funny blog)

View LEITH's profile

LEITH

175 posts in 2673 days


#10 posted 09-15-2010 07:56 AM

VERY NICE!

-- LEITH, SOUTH CAROLINA

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com