|Project by dickvn||posted 12-03-2009 05:24 AM||4142 views||13 times favorited||13 comments|
This is a zebrawood box I finished recently. The top frame, corner dovetails, hinges and feet are walnut. The top insert is double bookmatched veneer sliced from a piece of walnut burl attached to 1/8” BB plywood with contact cement. The inside lining is purple ultrasuede. I used an Incra Jig to cut the dovetails and make the hinges. The finish is three applications of Watco Danish Oil; the final coat was applied with 600 grit wet/dry sandpaper.