LumberJocks

using up scraps

  • Advertise with us
Project by vind posted 04-22-2016 10:42 AM 1398 views 7 times favorited 8 comments Add to Favorites Watch

Napkin holders and trays for everyone. First pic is Eastern maple and cherry. Third pic is figured maple and cherry, walnut, paduk, purpleheart and mahogany.

And learned about compound angles and planing figured maple is tough without chunking it out.

-- a dull chisel is just a fancy screwdriver





8 comments so far

View jeffswildwood's profile

jeffswildwood

2716 posts in 1850 days


#1 posted 04-22-2016 12:06 PM

Simple, yet effective and useful! I like these. Nice job and great use of scrap!

-- We all make mistakes, the trick is to fix it in a way that says "I meant to do that".

View majuvla's profile (online now)

majuvla

11486 posts in 2741 days


#2 posted 04-22-2016 12:14 PM

Very nice idea for napkins. Those trays are wonderfull.

-- Ivan, Croatia, Wooddicted

View doubleDD's profile

doubleDD

7017 posts in 1916 days


#3 posted 04-22-2016 01:35 PM

That is a cool napkin holder. Usually they are upright, not flat. Unique. Very nice trays too.

-- Dave, Downers Grove, Il. -------- When you run out of ideas, start building your dreams.

View ChrisK's profile

ChrisK

1865 posts in 2955 days


#4 posted 04-22-2016 02:09 PM

Nice design, simple, clean and elegant.

-- Chris K

View woodchuckerNJ's profile

woodchuckerNJ

1251 posts in 1507 days


#5 posted 04-22-2016 03:08 PM

I like the design, like ChrisK said perfectly.

well done.

-- Jeff NJ

View a1Jim's profile

a1Jim

116807 posts in 3450 days


#6 posted 04-22-2016 03:36 PM

Good work,and creative design.

-- http://artisticwoodstudio.com Custom furniture

View ttocsmi's profile

ttocsmi

31 posts in 1262 days


#7 posted 04-22-2016 05:22 PM

Very nice. Where did you locate the metalwork?

-- Knight of Sufferlandria 2015

View vind's profile

vind

23 posts in 1184 days


#8 posted 04-22-2016 07:28 PM

Thanks everyone for the comments.

I got 3/16” rod at Rona (your Lowes/HD) and just cut with a dremel. Then spun them in the drill press and cleaned it up with 400 grit. The legs are from LV which I also spun and cleaned up in the drill press.


Very nice. Where did you locate the metalwork?

- ttocsmi


-- a dull chisel is just a fancy screwdriver

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com