LumberJocks

Cherry Arts and Crafts Side Table

  • Advertise with us
Project by DanMelander posted 04-18-2016 12:42 AM 576 views 2 times favorited 7 comments Add to Favorites Watch
Cherry Arts and Crafts Side Table
Cherry Arts and Crafts Side Table No picture No picture No picture No picture No picture
Zoom Pictures

Cherry Arts and Crafts side table. The grids on the sides started out as a single board which I cut apart and then glued back together so the original grain appears across the gird. Top is 18” wide by 27” deep. The finish is Minwax wipe-on-poly. Seven coats on the top, and 3 on the rest of the table. There is a drawer, but I decided not to install a handle or knob for the time being.





7 comments so far

View JimYoung's profile

JimYoung

209 posts in 978 days


#1 posted 04-18-2016 01:22 AM

Simple and elegant. The extra effort on the grid was well worth the results.

-- -Jim, "Society is well governed when its people obey the magistrates, and the magistrates obey the law." -- Solon

View oldrivers's profile

oldrivers

680 posts in 957 days


#2 posted 04-18-2016 01:26 AM

Beautiful Table/work, I love to work with Cherry, congratulations on a great build.

-- Soli Deo gloria!

View Ken90712's profile

Ken90712

16831 posts in 2579 days


#3 posted 04-18-2016 03:24 PM

Great work, very nice table.

-- Ken, "Everyday above ground is a good day!"

View david38's profile

david38

2318 posts in 1734 days


#4 posted 04-18-2016 08:31 PM

nice job

View Mike_D_S's profile

Mike_D_S

171 posts in 1605 days


#5 posted 04-18-2016 10:46 PM

Great job, I’m a big fan of maintaining the grain pattern across pieces whenever possible. It’s not always easy to manage and takes some planning.

-- No honey, that's not new, I've had that forever......

View ohwoodeye's profile

ohwoodeye

1673 posts in 2544 days


#6 posted 04-19-2016 06:46 PM

Nice job. Would have liked to see a close-up of that grid and the grain pattern since you went through all that work.
Either way, well done.

-- Directions are just the Manufacturer's opinion on how something should be assembled. ----Mike, Waukesha, WI

View exelectrician's profile

exelectrician

2327 posts in 1818 days


#7 posted 04-24-2016 04:22 AM

Fine woodworking – If you posted 6 photos you would had made the top 3 for sure …..

-- Love thy neighbour as thyself

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com