Brush's/Pencil's/Scrappers quick grab organizer

  • Advertise with us
Project by Ken90712 posted 11-29-2009 10:04 PM 2894 views 21 times favorited 9 comments Add to Favorites Watch

Organizer for those quick items I seem to be always grabbing for. Threw this together with a piece of scrap plywood painted black and using scrap PVC 1 1/2 cut a 45* then screwed in. Used rolled up paper towels stuffed in tubes to adjust the height. I have pencils, scrappers, acid brushes, Q tips, Set of tweezers & 2 inch cheap HF brushes for glue and stains.

-- Ken, "Everyday above ground is a good day!"

9 comments so far

View lew's profile


11943 posts in 3662 days

#1 posted 11-29-2009 10:08 PM

Now this is COOL! It sure beats that Cool Whip tub screwed to my work bench!


-- Lew- Time traveler. Purveyor of the Universe's finest custom rolling pins.

View kosta's profile


946 posts in 3261 days

#2 posted 11-29-2009 11:07 PM

I took a piece of 4 in pine thats about 11 in long and screwed it to the back of my bench and then I drilled holes in it so I could hold drill bits or pencils in it

View MedicKen's profile


1610 posts in 3368 days

#3 posted 11-29-2009 11:28 PM

Cool idea Ken!!

-- My job is to give my kids things to discuss with their

View Jim K's profile

Jim K

94 posts in 3043 days

#4 posted 11-30-2009 04:01 AM


Nice idea. A person could make and use this for little things. Pencils punches chisels whatever great work.


View Beginningwoodworker's profile


13347 posts in 3579 days

#5 posted 11-30-2009 04:27 AM

Nice work, Ken!

View a1Jim's profile


116906 posts in 3483 days

#6 posted 11-30-2009 04:31 AM

Nice idea thanks

-- Custom furniture

View MsDebbieP's profile


18615 posts in 4067 days

#7 posted 11-30-2009 04:26 PM

well isn’t that brilliant!!!

-- ~ Debbie, Canada (

View falegniam's profile


335 posts in 2859 days

#8 posted 06-25-2010 05:21 PM

how did you attach the pvc to the plywood? you mentioned screws, but i don’t see how
very good idea !!!

-- If you work you eat - If you don't work, you eat, drink, and sleep.

View Ken90712's profile


17548 posts in 3095 days

#9 posted 06-26-2010 05:48 PM

The bottom of the Pvc. I pre-drilled them then screwed them into the plywood base. I used gray drywall screws and hit them with blak paint. It crude but effective.

-- Ken, "Everyday above ground is a good day!"

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics