|Project by jesinfla||posted 04-10-2016 11:33 PM||1212 views||3 times favorited||5 comments|
I made this out of a canopy frame (background is one), some 1×2’s and some plastic sheeting.
I made it in panels so in case anything rips/tears or gets ruined I can just replace the panel. There are 5 side panels and 1 top panel. The top has additional plastic sheet to keep spray from escaping through the cracks.
The floor is one of the free tarps from HF
The rear panel is removable to allow wind to go through the unit without damaging it on windy days.
Behind the booth is a 24×24 slot where a air filter goes – the filter can actually be any size as there is only a bottom to hold it up. The sides and top are wide open – that way what ever cheap filter is on sale will fit :)
In front of the air filters, on a table I put a fan for exhaust to suck the spray out
Works very well actually – the fan sucks out the over spray and keeps it from painting my yard ;)
The whole thing will slide back and fit under the canopy in the background during rain.
It’s not pretty but it’s functional
-- They said I could be anything... So I became Sarcastic! They also said making drawers is easy... I think they lied :(