LumberJocks

Turned walnut bowl

  • Advertise with us
Project by htl posted 04-05-2016 01:10 AM 529 views 0 times favorited 9 comments Add to Favorites Watch

Been so much great turning going on around here, just thought I’d get into the action.
Walnut

-- There's a hundred ways to do anything, alot depends on the tools at hand.





9 comments so far

View LittleBlackDuck's profile

LittleBlackDuck

599 posts in 284 days


#1 posted 04-05-2016 04:00 AM

Where’s the treads?????

Of all woodworking genres, bowl turning has never caught my eye. I have a heap of bowl blanks (bought at the wood show when I must have been smoking something), however, I refuse to give myself to the Dark Side..

-- There's two ways to do things... My way or the right way.. LBD

View htl's profile

htl

2199 posts in 622 days


#2 posted 04-05-2016 05:33 AM

Ducky I’ve turned maybe 25 or so parts for furniture and a couple a bowls.
It’s quite fun and is more of a use you eyes and feel type of building, if that makes any sense.

-- There's a hundred ways to do anything, alot depends on the tools at hand.

View LittleBlackDuck's profile

LittleBlackDuck

599 posts in 284 days


#3 posted 04-05-2016 05:54 AM

Nothing against turning… just bowls… Bowls never caught my fancy and still doesn’t.

Furniture is good. Turning a BOOMBY is better. I love to turn (and not just a “new leaf”).

I make(d) a lot of pens, however, until I get off my rrrrs and set up a proper WEB site, one can only make so many and give to friends until that same one starts to feel the pull of the freeloaders and start sell some for at least a shekel more than break even. That’s why I deviated into toy models.

I also used to do a lot of turning for jigs and dust extraction connectors (as no 2 different branded 2.5” dust vac accessories fit each other), until…........... I bought a 3D printer. Now I can create couplers/connectors 1-2mm thick without break out and totally repeatable to about .1mm tolerances, which I have trouble matching with the skew.

-- There's two ways to do things... My way or the right way.. LBD

View majuvla's profile

majuvla

9139 posts in 2331 days


#4 posted 04-05-2016 05:59 AM

Nice bowl. Obviously, turning addiction got you.

-- Ivan, Croatia, Wooddicted

View Dutchy's profile

Dutchy

2015 posts in 1632 days


#5 posted 04-05-2016 06:43 AM

Well done.

Let me guess. SM.

-- My englisch is bad but how is your dutch?

View htl's profile

htl

2199 posts in 622 days


#6 posted 04-05-2016 01:28 PM

Ducky now I understand.
I couldn’t figure why you would buy a bunch a blanks then not have the tools to use them.
Now I see the rest of the story.
majuvla the turnings I’ve done are over a 35 year time span so no addiction at this time. LOL
I seem to do things in spurts.
I love to learn new things and try different stuff but once I get the hang of it and before I get any good I jump to something else.
Don’t ask me why???

Dutchy surely not the Shop Smith. LOL

Ducky it’s funny how we all have different interests cause pen turning has never caught my interest, could be cause I write like a doctor I can’t even read my own writing..

-- There's a hundred ways to do anything, alot depends on the tools at hand.

View ZAGREB's profile

ZAGREB

518 posts in 1113 days


#7 posted 04-05-2016 06:29 PM

This is so when you’re addicted
like me,litlleblackduck….you…
who cares, the main thing is turning
greetings,Bambi

-- bambi

View JoeinGa's profile

JoeinGa

7481 posts in 1470 days


#8 posted 04-05-2016 07:25 PM

Nice job, I like this one. Just curious, is the base and bowl separately made and joined? Or is it all one piece.
.

-- Perform A Random Act Of Kindness Today ... Pay It Forward

View htl's profile

htl

2199 posts in 622 days


#9 posted 04-07-2016 03:48 AM

Two piece, wasn’t thick enough so glued on for the base.
Kind a does look like a single but the wood came from the same board.
And thanks all for the great comments.

-- There's a hundred ways to do anything, alot depends on the tools at hand.

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com