|Project by edwood1975||posted 04-03-2016 03:44 PM||1693 views||7 times favorited||11 comments|
I found inspiration for this table from ” The Wood Whisperer” I made some modifications such as a lot more storage with the use of a shelf for my crosscut sled ( finally has a home up from under my workbench), I also put 3 self made drawers . I have 1 large drawer for a dedicated saw blade storage I only have 3 blades and a dado set but I plan on getting more as time progresses. The other 2 drawers are smaller in size and I will use them for TS accessories ( push sticks, feather boards)
The entire table is made from 3/4” poplar plywood , it measures 48” sq and is about 36 3/4” high.
The legs are just an L form secured with glue and pocket screws. The stretchers are also glue and screwed into each leg.
Here you can see the crosscut sled in its new home
Blade Storage Drawer, it’s just 1/2” plywood sides with 3/4” inner pieces with 1/4” groves cut into them to receive the blades
Smaller drawers for TS accessories
The drawer false fronts are made with 3/4” poplar plywood with solid oak wood edge banding
I plan on finishing it with polyurethane…
I hope you like and thanks to this website for all projects that contributed inspiration for my project