Project Information
Earlier this winter while snowed in, I made a drill press table for my table top Ryobi drill press and then a mobile base for the drill press as well. All made from scraps laying around the shop - drill press table = 2 pieces of 3/4" plywood glued together and some oak strips around the front and sides. The only thing I had to purchase was the T-track from Rockler and the casters which I purchased on sale from Woodcraft.
The mobile base is 3/4" plywood, with the top made from leftover oak stair tread as well as some of the drawer front. The other drawer fronts are maple from various projects.
In the 10 drawers, I have some of my corded and cordless drills, drill bit sets, chucks and holds, forstner bits, masonry bits, spade bits, step bits, various specialty bits, etc.
The mobile base is 3/4" plywood, with the top made from leftover oak stair tread as well as some of the drawer front. The other drawer fronts are maple from various projects.
In the 10 drawers, I have some of my corded and cordless drills, drill bit sets, chucks and holds, forstner bits, masonry bits, spade bits, step bits, various specialty bits, etc.