LumberJocks
DAILY DEALS Clampmate Frame Clamp - Internet Only Special!  |  Makita Makita Recon LCT203W 10.8 Volt Lithium Ion Impact Driver 2 Pc Kit

Don't forget to tip your Waitress!!

Project by littlecope posted 12 days ago 446 views 0 times favorited 18 comments Add to Favorites Watch

The latest box, one that will be a small Christmas present for the Waitress I work with. Nowadays, many places work without a cash register and the girls are required to provide their own “Bank” to make change for the customers. They keep their coin in small containers, whatever is kicking around, I figured this would be better. Or not, of course, she can use it for anything she wants!!
It has Maple sides, with “Midnight Blue” Acrylic panels, top and bottom. The Acrylic came from work. When they first re-did the place, they used it to top some shelves, but apparently bought too much. The extra was headed to the trash, when the boss asked me if I wanted it…
I cut a small lip, to hold the lid from sliding off, with a technique I read about. Before the box is assembled, a slice is made with the Table Saw, halfway through, at the desired lid height. After the box is assembled, a second “parting” cut is made, half way through, a saw blade’s width lower
The Blue didn’t photograph very well. To the eye, it’s darker and reminds me of the evening sky… :)

-- Mike in Manchester, NH---Unpleasant tasks are simply worthy challenges to improve skills.


18 comments so far

View SawDustnSplinters's profile

SawDustnSplinters

219 posts in 672 days


posted 12 days ago

Nice box my friend, I like the color..kinda reminds me of kickin back on a beach in Mexico with a Corona or two, that deep blue color sets it off :)

Nice work, I know she will appreciate it…thanx for the post

-- Frank, Little River/Academy, Texas , http://www.allthingsrustix.com

View TopamaxSurvivor's profile (online now)

TopamaxSurvivor

2966 posts in 566 days


posted 12 days ago

Nice box, but she’ll need a hiding place for the money or is there a secret compartment we don’t know about?

-- Debt is nothing more than the 21st Century's form of slavery.

View littlecope's profile (online now)

littlecope

574 posts in 393 days


posted 11 days ago

They keep the cash on them and leave the change on the check-out counter. It’s a computer system and at the end of the shift they make a pay-out to the house. What’s left in their pocket is theirs’... No “Till” at all. It’s done that way in a lot of places these days. At the end of the day, the boss makes a Bank Drop, so there’s never any cash on the premises…
Thanks for your kind words!!

-- Mike in Manchester, NH---Unpleasant tasks are simply worthy challenges to improve skills.

View Andrew's profile

Andrew

88 posts in 89 days


posted 11 days ago

Nice job. She should love it.

-- As the Saw Turns

View degoose's profile

degoose

1964 posts in 245 days


posted 11 days ago

I hope you put a tip in the box like a coin in a new wallet..nice box joints.

-- Drink once, cut twice. New website up.... lazylarrywoodworks.com.au

View scrappy's profile

scrappy

1567 posts in 321 days


posted 11 days ago

Great gift! You did a fine job on the box joints and thank you for the how to on the lid. Whenever I cut a lid off the box, I have to add a stip along the inside as an edge to line the lid up. This sound like it is a lot easier to do.

Great design. Great build.

Scrappy

-- Scrap Wood's the best...the projects are smaller, and so is the mess!

View nmkidd's profile

nmkidd

368 posts in 63 days


posted 11 days ago

Nice box…....nice joints…...........hope she fills it everyday. Good job.

-- Doug, New Mexico.......the only stupid question is one that is never asked!........don't fix it, if it ain't broke!

View Bob Kollman's profile

Bob Kollman

97 posts in 81 days


posted 11 days ago

Nice box. I like maple and the blue really does set it off. I work for a plastic company and I have tons of acrylic and poly sheets laying around the shop. With the exception of jigs I hardly ever use the stuff.

-- Bob Kenosha Wi.

View ellen35's profile

ellen35

529 posts in 323 days


posted 11 days ago

Nice job Mike. I like the blue on top – gives it some definition and makes it easy to see.
Glad to see you are grateful to the “women” you work with.
Waitressing is a hard job – a little beauty makes it easier. I suspect she will take it home, however!
You are truly a boxaholic!
Ellen

-- Ellen on Cape Cod

View eddy's profile

eddy

278 posts in 255 days


posted 11 days ago

ditto on the how to on the lid thank you
nice box

View patron's profile (online now)

patron

2365 posts in 232 days


posted 11 days ago

nice work , mike .

i made a similar box for a friends bible once ,
he was very thankfull ,
but wondered why it didn’t open ?

the seam was not visible ,
i had to show him how to open it !

-- david ,new mexico ,allheart

View whitedog's profile

whitedog

164 posts in 348 days


posted 11 days ago

i love a box with a purpose … great little box

-- Paul , Calfornia

View littlecope's profile (online now)

littlecope

574 posts in 393 days


posted 10 days ago

Thanks again everybody!!
Larry: Excellent idea!! I think I’ll ante up the first dollar!
Scrappy & Eddy: You’re very welcome!
Ellen: I don’t know if you ever worked as a Waitress, but you’re not kidding, it is very hard work!! Aside from all the running around, there are some people who who seem to go out for the express purpose of having a lousy time. There’s no pleasing them!! Oftentimes, the most demanding people are the worst tippers as well…or at least, so I’ve heard… I had the opportunity to try to be a Waiter many years ago. No Way!! I would have shown them the door!!
David: This one is almost invisible when it’s positioned right, but it jiggles around some… I really had to loosen it up because the air trapped inside was keeping it from closing!! I’ve been trying to work on the reveal of the joints, to make them pretty and all, but the actual connections aren’t too bad if, without glue, it’s keeping the air from escaping… The experiment on this one was with the lipped parting cut. That technique is more appropriate to miter cornered boxes. The first time I tried this on a box I had a plow-out to contend with, the same as with the dadoes for the panels. On this one, I wanted to see if I could cut the box joints correctly to eliminate that. It’s next to impossible to see from the pictures, but the “Box Joints” on the lid aren’t exactly box joints at all, but rather a weird sort of snaggle-toothed connection. Amazingly, it actually worked!! Will wonders ever cease?!

-- Mike in Manchester, NH---Unpleasant tasks are simply worthy challenges to improve skills.

View Kristoffer's profile

Kristoffer

88 posts in 106 days


posted 7 days ago

Another nice box, Mike. Have you considered using an etching cream and stencil to throw her initials or a symbol on to the acrylic top?
AND…. Makin’ gifts for a waitress, eh???? Anything goin’ on there?

-- Cheers and God Bless

View littlecope's profile (online now)

littlecope

574 posts in 393 days


posted 7 days ago

Kristoffer: To answer your questions, in order: No and No…

-- Mike in Manchester, NH---Unpleasant tasks are simply worthy challenges to improve skills.

View pommy's profile

pommy

943 posts in 582 days


posted 7 days ago

Cool box Mike she will love it my friend

-- cut it saw it scrap it

View littlecope's profile (online now)

littlecope

574 posts in 393 days


posted 7 days ago

Thanks, Andy!!

-- Mike in Manchester, NH---Unpleasant tasks are simply worthy challenges to improve skills.

View notottoman's profile

notottoman

423 posts in 121 days


posted 6 days ago

Wow.. Just love the color.
Good size as well… What you think it could hold $1000 in $1’s. LOL
Nice one Mike.

-- "Even small steps makes a distance." (Shawn Phillips, musician)

You must be signed in to post the comments.

  • View all advertisers
  • Advertise with us

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase