| Project by missingdigitworkshop | posted 1298 days ago | 1794 views | 2 times favorited | 8 comments | ![]() |
![]() |
This is a paper sorter / mail box I make for some local teachers. It is designed to hold 8.5×11 sheets and has a book shelf on the bottom.
It’s 36 high, 37.5 wide and 11.75 deep. Made from 1/2” ply. Dividers are 1/4” tempered hard board. The back is 1/8” tempered hard board.
-- Do not be discouraged by those who don't. Be inspired by those who do.
| Pin It |



























8 comments so far
a1Jim
home | projects | blog
87253 posts in 1747 days
#1 posted 1298 days ago
Very cool well done
-- W James Brokenbourgh Custom furniture maker http://artisticwoodstudio.com/
RexMcKinnon
home | projects | blog
2590 posts in 1366 days
#2 posted 1298 days ago
Nice, going to fit a lot of paper in there. Teachers shap the minds of our future leaders. Gotta be nice to them.
BTW Interresting picture. “Missing Digit WorkShop” Sounds like there’s a story behind that one.
-- If all you have is a hammer, everything looks like a nail!
Karson
home | projects | blog
34370 posts in 2571 days
#3 posted 1298 days ago
A great looking sorting station. Nice job.
-- I've been blessed with a father who liked to tinker in wood, and a wife who lets me tinker in wood. Southern Delaware karson_morrison@bigfoot.com †
TomFran
home | projects | blog
2933 posts in 2165 days
#4 posted 1298 days ago
Looks like it will be a very useful piece of cabinetry. Projects that make life more organized are great!
-- Tom, Surfside Beach, SC - Romans 8:28
huff
home | projects | blog
2556 posts in 1455 days
#5 posted 1297 days ago
Nicely done.
-- John @ http://www.thehuffordfurnituregroup.com
fredf
home | projects | blog
495 posts in 1880 days
#6 posted 1174 days ago
How did you do the vertical dividers? just butt to the shelves??
-- Fred, Springfield, Ma
WistysWoodWorkingWonders
home | projects | blog
11517 posts in 1327 days
#7 posted 1170 days ago
nice build… could use one of those in my home office…. lol
-- New Project = New Tool... it's just the way it is, don't fight it... :)
missingdigitworkshop
home | projects | blog
135 posts in 1298 days
#8 posted 983 days ago
Fredf: Sorry for the late reply. The dividers are slid into a 1/4×1/4 dadoes on the outside and finger jointed for the 3 middle supports.
-- Do not be discouraged by those who don't. Be inspired by those who do.
Have your say...