LumberJocks

Round beetle kill bar table

  • Advertise with us
Project by Earache posted 03-02-2016 01:01 AM 472 views 0 times favorited 1 comment Add to Favorites Watch

Made a Beetle kill bar table for a friend of mine. Although the wood may not be the best choice for a durable table top, it has a look that many like.
I selected the wood mainly foe the grain patterns and then planed the planed prior to glue up. Glued with biscuits and formed into a square table. Used a router with a circle jig to round off the 44” diameter top. Finished with oil and poly.
I added a 1,.500” X .125 steel edge to the top, secured with lag bolts.
Legs are 1.500” square steel tubing with a clear powdercoated finished. Edge band was also powdercoated clear.

-- Eric - Littleton, Colorado





1 comment so far

View recycle1943's profile

recycle1943

1100 posts in 1013 days


#1 posted 03-02-2016 11:01 AM

good lookin table

-- Dick, Malvern Ohio - Your imagination is your only holdup

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com