LumberJocks

Coat rack, ash

  • Advertise with us
Project by brg posted 02-29-2016 02:38 PM 524 views 2 times favorited 2 comments Add to Favorites Watch

Here is another quick project before I started to work on more time-consuming tasks.
My brother just refurbished his apartment and wanted a few new items of furniture.
The first item was a coat rack and his choice of wood was ash.

I bought a pile of kiln dried, rough sawn lumber to work with:

The coat rack consists of two major parts: a flat back panel and a top frame.
The frame was constructed with bridle joints in the corners and it holds five 12mm (~1/2” outer diameter) steel rods. Rods were sanded, covered with lacquer and epoxied into the wood.
The top frame was attached to the back with wood glue and a few strong screws (+ plugs to cover them).

The grain may look quite intense on the photos, but it is softer in reality.

A TV unit, display cabinet and a light door will follow… I already have the lumber for those items :)





2 comments so far

View recycle1943's profile

recycle1943

1158 posts in 1090 days


#1 posted 03-01-2016 12:07 AM

A modern rustic look – I like it a lot

-- Dick, Malvern Ohio - Your imagination is your only holdup

View jasonallen's profile

jasonallen

175 posts in 1088 days


#2 posted 03-01-2016 02:49 AM

I really like that design. Ash always looks cool.

-- Skill and confidence are an unconquered army.

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com