| Project by bamaboy | posted 29 days ago | 786 views | 2 times favorited | 7 comments |  |
 |
Assembly work table is a combination of several different tables seen in woodworking magazines and websites.
It was constructed using 2-8×4x4 for legs, 2-10×2x6 for basic top frame, 3-2×4x8 for bottom shelf,
1-sheet 4×8x3/4 plywood, 1 sheet 4×8x3/4MDF. Table top is framed in with a couple of pieces of scrap poplar
screwed every 6 inches into PW and MDF, screws covered with poplar plugs. Everything gets two coats
of gloss poly.
Pipe rack is a cheap version of a commerical rack. It was made with 2×4 frame and pipe section screwed into
the frame work to hold pipe clams.
Runout table is constructed with 1×4 pine. Each section has a drop in lamanited MDF top available in Home HD, Lowes etc. Makes for easy clean up, and wood slides easily across run out tale.
7 comments so far
Bob A in NJ
home | projects | blog
522 posts in 894 days
posted 29 days ago
Nice looking simple, well built, inexpensive bench for sure. I’d put a tool box on that shelf and still have plenty of room left over for other items. Nice job on getting your shop more effective.
-- Bob A in NJ
Kindlingmaker
home | projects | blog
1470 posts in 421 days
posted 29 days ago
God work and they look strong! Happy woodworking!
-- Never board, always knotty, lots of growth rings
Kindlingmaker
home | projects | blog
1470 posts in 421 days
posted 29 days ago
OPPS! That was Good work!
-- Never board, always knotty, lots of growth rings
a1Jim
home | projects | blog
16790 posts in 472 days
posted 29 days ago
Simple but efective work table I’ve used one like it for years not great art but very functional. good job on the rest of the projects too.
-- Jim from Heirloom Woodshop Southern Oregon
Beginningwoodworker
home | projects | blog
4170 posts in 568 days
posted 29 days ago
Nice work!
-- CJIII Future cabinetmaker
Dudley
home | projects | blog
347 posts in 155 days
posted 29 days ago
Good show. BZ
-- Dudley Young USN Ret.
hannes
home | projects | blog
5 posts in 28 days
posted 28 days ago
I am looking at building something (assembly table) similar in the near future. Thanks for sharing. Good work!
-- Hannes, Cape Town, South Africa