LumberJocks

Walnut Headboard

  • Advertise with us
Project by bryguy22 posted 02-19-2016 12:42 AM 560 views 0 times favorited 1 comment Add to Favorites Watch

This is a headboard that is going to be used as a stand alone accent piece, attached to the bed frame and up against a wall. Unfortunately did not get a picture of the completed headboard after it was installed. The project was a piece of 8/4 walnut that was book matched. Joints are mortise and tenon. One tenon is fixed and the other is a floating allowing for seasonal movement. The holes were then covered with a faux square peg (not pictured) The legs are not shown in the picture but are a 4 sided pencil post taper approx 6 ft tall. The piece was finished with a french polished shellac.

-- Bryan, york pa





1 comment so far

View redesigningwood's profile

redesigningwood

139 posts in 300 days


#1 posted 02-25-2016 12:53 PM

Nice job-

-- Mat

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com