• Advertise with us
Project by GaryF posted 10-16-2009 03:58 AM 895 views 0 times favorited 2 comments Add to Favorites Watch

This was rough pallet wood from work that a big electrical motor came in on. I ran it thru the planner, a dado in the middle for a cleat to mount it, mitered for a 6 inch return to the wall. I installed a cleat thru the mortor joints with tapcon screws, then just attached it with screws from underneath.I finished it with sedona red stain and poly. gary

2 comments so far

View cstrang's profile


1801 posts in 2207 days

#1 posted 10-16-2009 01:43 PM

Nice work, ive made a few things out of old pallets myself in the past, it is amazing what you can do with an old pallet.

-- A hammer dangling from a wall will bang and sound like work when the wind blows the right way.

View a1Jim's profile


113725 posts in 2616 days

#2 posted 10-18-2009 06:02 AM

Good job

-- Custom furniture

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics