LumberJocks

Ring Boxes

  • Advertise with us
Project by Roger posted 02-13-2016 12:22 AM 1508 views 5 times favorited 36 comments Add to Favorites Watch

Fashioned after a project in Woodworkers Journal Dec 2015, I decided to do 3 of these ring boxes. About 3×3x2. These are nice to have near the kitchen sink. Some may like to take off their rings while doing things in there. Done with cuttoffs/scraps. Maple and Walnut laminated. Lids of resawn Zebrawood (thankyou Super Dave), and Cherry. Lid handles are Ebony. Lid stays put with a couple of 1/4” rare earth magnets. Bottoms have a little red leather bling. Finished with 4 coats of spray can lacquer. I’ll post a pic of my high-tech spray booth below…..................don’t laugh, it works..
Thnx for lookin in. Good/Bad/Ugly comments will be tolerated.

-- Roger from KY. Work/Play/Travel Safe. Keep your dust collector fed. Kentuk55@yahoo.com





36 comments so far

View Roger's profile (online now)

Roger

20594 posts in 2410 days


#1 posted 02-13-2016 12:24 AM

Here is my high-tech spray booth, and a few other pics.

-- Roger from KY. Work/Play/Travel Safe. Keep your dust collector fed. Kentuk55@yahoo.com

View Monte Pittman's profile

Monte Pittman

23942 posts in 1944 days


#2 posted 02-13-2016 12:32 AM

Cool idea. Great job sir.

-- Mother Nature created it, I just assemble it.

View lew's profile

lew

11544 posts in 3361 days


#3 posted 02-13-2016 12:55 AM

Beautiful. Love the use of “scraps”!

-- Lew- Time traveler. Purveyor of the Universe's finest custom rolling pins.

View Todd Barrone's profile

Todd Barrone

814 posts in 1878 days


#4 posted 02-13-2016 12:57 AM

I like those, great job sir.

-- "The Cedar King" https://www.facebook.com/BarroneFarm

View doubleDD's profile

doubleDD

5872 posts in 1649 days


#5 posted 02-13-2016 01:21 AM

Ring a ding ding, a box for the ring. Cool job Roger. I think a lot of us shared your spray booth one time or another. Looks similar to mine.

-- Dave, Downers Grove, Il. -------- When you run out of ideas, start building your dreams.

View Joe Lyddon's profile

Joe Lyddon

9667 posts in 3658 days


#6 posted 02-13-2016 01:29 AM

Very COOL, Roger!

-- Have Fun! Joe Lyddon - Alta Loma, CA USA - Home: http://www.WoodworkStuff.net ... My Small Gallery: http://www.ncwoodworker.net/pp/showgallery.php?ppuser=1389&cat=500"

View kiefer's profile

kiefer

5093 posts in 2273 days


#7 posted 02-13-2016 01:32 AM

Nice little boxes and good thought ,I have seen a couple of rings go down the drain and what a job trying to recover them .
Love the spray booth !

Klaus

-- Kiefer https://www.youtube.com/user/woodkiefer1/videos

View hoss12992's profile

hoss12992

3847 posts in 1499 days


#8 posted 02-13-2016 01:50 AM

Love the ring boxes. The spray booth is really cool and much more high tech than mine. Great job buddy

-- The Old Rednek Workshop https://www.facebook.com/theoldrednekworkshoptn

View distrbd's profile

distrbd

2246 posts in 2052 days


#9 posted 02-13-2016 02:05 AM

The boxes look great,I like them even more because you used scrap pieces of wood which were useless but with your creativity became something beautiful .
I love the spray booth,look just like mine,lol.

-- Ken from Ontario, Canada

View Jerry's profile

Jerry

2119 posts in 1254 days


#10 posted 02-13-2016 02:58 AM

Very nice work Roger :-)

-- There are good ships and there are wood ships, the ships that sail the sea, but the best ships are friendships and may they always be. http://geraldlhunsucker.com/

View hunter71's profile

hunter71

2890 posts in 2792 days


#11 posted 02-13-2016 03:37 AM

Lots of ideas here. Nice job.

-- A childs smile is payment enough.

View LumberingWoodworker's profile

LumberingWoodworker

119 posts in 1957 days


#12 posted 02-13-2016 04:26 AM

Nice idea! Thanks for sharing.

-- http://www.TravelingCraftsman.etsy.com/

View Grumpy's profile

Grumpy

22105 posts in 3457 days


#13 posted 02-13-2016 04:31 AM

Nice job Roger and well thought out buddy.

-- Grumpy - "Always look on the bright side of life"- Monty Python

View kdc68's profile

kdc68

2553 posts in 1883 days


#14 posted 02-13-2016 09:11 AM

Nice looking boxes Roger !....Great idea because it sucks fishing for a ring lodged down in the trap…......
What brand is that spray can seen in your “spray booth” ?

-- Measure "at least" twice and cut once

View majuvla's profile

majuvla

10098 posts in 2473 days


#15 posted 02-13-2016 09:20 AM

Wonderful idea! Definately you can use scraps for that. Nice boxes, I like that angled edge.

-- Ivan, Croatia, Wooddicted

showing 1 through 15 of 36 comments

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com