| Project by Dustmite97 | posted 1345 days ago | 1265 views | 0 times favorited | 5 comments |  |
 |
This is a simple box I made for my scraps. I made the box out of scrap too. It is made from 1/2 in thick chip board and 2×2’s. Tools used were table saw, miter saw, circular saw, and cordless drill.
-- Remember, measure twice, cut once
| Pin It |
5 comments so far
GuyK
home | projects | blog
355 posts in 2276 days
#1 posted 1345 days ago
Thanks for posting this. I could use one of these myself. My under the bench pile of scraps is getting out of hand.
-- Guy Kroll www.thelandsathillsidefarms.org
drfisherman
home | projects | blog
33 posts in 1367 days
#2 posted 1345 days ago
Same here…
-- "The worst day fishing is better than the best day working!"
NBeener
home | projects | blog
4805 posts in 1371 days
#3 posted 1345 days ago
Long live the butt joint!
Mine’s just an old double-walled corrugated wardrobe moving box (I still have a half-dozen of them).
-- -- Neil
a1Jim
home | projects | blog
89049 posts in 1774 days
#4 posted 1344 days ago
wafer wonder
-- W James Brokenbourgh Custom furniture maker http://artisticwoodstudio.com/
jim1953
home | projects | blog
2568 posts in 2039 days
#5 posted 1344 days ago
Great Bin
-- Jim, Kentucky
Have your say...