or Join Now!
Made this as a gift to a friend….......
-- Factory in a box ... http://www.DigitalFabber.com
home | projects | blog
95 posts in 2521 days
Preview this project card
arts and crafts
5 posts in 2521 days
#1 posted 10-03-2009 12:27 AM
Maybe you should be teaching sign making
1828 posts in 2531 days
#2 posted 10-03-2009 12:29 AM
i would have to agree with azfoster, very nice work
-- A hammer dangling from a wall will bang and sound like work when the wind blows the right way.
#3 posted 10-03-2009 01:14 AM
I have to be honest… we use a CNC machine (CarveWright) and then do all of the finish carving and painting by hand. Thank you for your kind comments. Anytime you wanna stop by the shop I would be happy to share eveything I know.
171 posts in 2615 days
#4 posted 10-03-2009 06:23 AM
Even with the CarveWright, it still better than I could do. Does the CarveWright leave the wood ready for finishing or is there a lot of tedious sanding?
-- You always have tomorrow to stop procrastinating.
#5 posted 10-03-2009 09:01 PM
The software (that comes with the CarveWright) actually allows you to set the quality… draft to optimal. On optimal there is usually less than 5 minutes of clean up (sanding) and most of the time you can use a brush on the piece and knock most of the “hairs” off of it. If you check out my website there are alot more projects on there.
2952 posts in 3358 days
#6 posted 10-04-2009 01:48 AM
I like it. Very nice!
-- Tom, Surfside Beach, SC - Romans 8:28
623 posts in 2733 days
#7 posted 10-06-2009 03:42 PM
-- Gary, Little River,SC I've Learned that the Lord didn't do it all in one day and neither can I
Go to Pulse page »
©2016 Verticalscope Inc. All Rights Reserved. |
Terms of Service
DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.
Latest Projects |
Latest Blog Entries |
Latest Forum Topics