LumberJocks

Box joint box

  • Advertise with us
Project by Kramerwood posted 01-19-2016 04:10 PM 534 views 0 times favorited 2 comments Add to Favorites Watch

I made a Box joint box in my wood shop class. I rough 4 pieces, two pieces at 11” and two at 8”. Then after I correctly cut my pieces I jointed my sides so they could lock together. After that, I measured the inside of I could make the base. After my project was completed I glued it together then sanded. Lastly, I stained my project with gun stock and put a coat of poly on. This project was fairly easy and was a great way to make a box.





2 comments so far

View rctomps's profile

rctomps

45 posts in 1437 days


#1 posted 01-19-2016 05:48 PM

great job! I love using box joints.

-- Rob

View Tooch's profile

Tooch

1349 posts in 1337 days


#2 posted 01-20-2016 10:46 AM

Shane, try to take more time when snapping the pictures for your post. The three that you have included here do not fully show the end result of how your project looked because they are too close. Don’t forget, the first picture will always be the thumbnail that everyone sees.

You should take as much pride in you POST as you do in you PROJECT. We can work on posting stuff later in class.

-- "Well, the world needs ditch-diggers too..." - Judge Smails

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com