LumberJocks

Chevron Style Cutting Board

  • Advertise with us
Project by Tim_CPWD posted 01-11-2016 07:58 AM 1069 views 3 times favorited 12 comments Add to Favorites Watch

I have seen some very nice cutting boards on this site and was recently inspired by a chevron style posted by jaycidesigns. I decided to try my hand at one just for fun. This is my first attempt at the chevron pattern design. It was a good learning experience and I am happy with the finished product. This is made from Walnut, Maple and Padauk and finished with olive oil.

-- Tim Haenisch, San Diego Ca. http://www.facebook.com/commandperformancewooddesigns





12 comments so far

View majuvla's profile (online now)

majuvla

9138 posts in 2330 days


#1 posted 01-11-2016 10:55 AM

Awesome choice of wood colours. Also you’ve done wonderful pattern on this.

-- Ivan, Croatia, Wooddicted

View Roger's profile

Roger

19867 posts in 2267 days


#2 posted 01-11-2016 01:18 PM

Some nice eye trickery and gr8 wood combos

-- Roger from KY. Work/Play/Travel Safe. Keep your dust collector fed. Kentuk55@yahoo.com

View CharlesA's profile

CharlesA

3021 posts in 1260 days


#3 posted 01-11-2016 01:18 PM

nice.

-- "Man is the only animal which devours his own, for I can apply no milder term to the general prey of the rich on the poor." ~Thomas Jefferson

View david38's profile

david38

2517 posts in 1806 days


#4 posted 01-11-2016 01:41 PM

looks great

View HillbillyShooter's profile

HillbillyShooter

5811 posts in 1755 days


#5 posted 01-11-2016 01:44 PM

Attractive!

-- John C. -- "Firearms are second only to the Constitution in importance; they are the peoples' liberty's teeth." George Washington

View Woodenwizard's profile

Woodenwizard

1254 posts in 2506 days


#6 posted 01-11-2016 04:59 PM

Great to see you branching out. Love seeing your work and this is no exception. GREAT job.

-- John, Colorado's (Wooden Wizard)

View jaycidesigns's profile

jaycidesigns

7 posts in 735 days


#7 posted 01-11-2016 07:26 PM

Wow, Nailed it!! That’s a great looking board!!

-- Jason Rice, Indianapolis, IN

View kdc68's profile

kdc68

2526 posts in 1740 days


#8 posted 01-11-2016 09:25 PM

Good looking board….Well done !

-- Measure "at least" twice and cut once

View RichardBaker3's profile

RichardBaker3

5 posts in 334 days


#9 posted 01-12-2016 12:58 AM

Nice selection of woods

View Grumpy's profile

Grumpy

21563 posts in 3314 days


#10 posted 01-12-2016 02:38 AM

Great visual effect Tim.

-- Grumpy - "Always look on the bright side of life"- Monty Python

View Garwood's profile

Garwood

22 posts in 1407 days


#11 posted 01-12-2016 03:52 AM

That is a very nice board. For boards you make in the future, use mineral oil or any oil specifically produced for use on cutting boards rather than a plant based oil such as olive oil which will eventually turn rancid.

-- Gary

View Tim_CPWD 's profile

Tim_CPWD

306 posts in 708 days


#12 posted 01-19-2016 06:09 AM

Thank you all for the nice comments.

Gary, thank you for the feedback on the olive oil. I will take your advice and pick up some mineral oil.

-- Tim Haenisch, San Diego Ca. http://www.facebook.com/commandperformancewooddesigns

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com