• Advertise with us
Project by degoose posted 09-15-2009 06:06 AM 1986 views 1 time favorited 19 comments Add to Favorites Watch

This little bit of frivolity is still not counted in the 150 which is just off track at the moment… am building an entertainment unit for a plasma TV using New Guinea Rosewood and a coffee table in Queensland Red Cedar.
Made from Silver Ash with thin arced stripes of New Guinea Rosewood.
Just because I need to post something.

-- Drink twice... and don't bother to cut... @ For lovers of all things timber...

19 comments so far

View a1Jim's profile


115166 posts in 2994 days

#1 posted 09-15-2009 06:10 AM

Very cool larry once again

-- Custom furniture

View moshel's profile


865 posts in 3100 days

#2 posted 09-15-2009 06:11 AM

very nice and clean. love the grain of the silver ash. I wonder if there are bandsaw blades with thicker kerf so you could make the kerf exactly the width of the strip. maybe use a router? would make it look more “magical”

-- The woods are lovely, dark and deep, but I have promises to keep...

View Karson's profile


35032 posts in 3817 days

#3 posted 09-15-2009 07:55 AM

a very graceful board. Nice job.

-- I've been blessed with a father who liked to tinker in wood, and a wife who lets me tinker in wood. Southern Delaware soon moving to Virginia †

View ellen35's profile


2719 posts in 2849 days

#4 posted 09-15-2009 12:26 PM

This one is quite delicate and simple… beautiful. Karson’s description of “graceful” says it all.
You continue to amaze me with your cretivity.

-- "Don't let the perfect be the enemy of the good." Voltaire

View matt garcia's profile

matt garcia

1877 posts in 3089 days

#5 posted 09-15-2009 12:51 PM


-- Matt Garcia Wannabe Period Furniture Maker, Houston TX

View blackcherry's profile


3292 posts in 3240 days

#6 posted 09-15-2009 01:28 PM

I really like the stain silky look of the sliver ash. The board has a contemporary look, clean and crisp. Good luck on all your projects…Blkcherry

View Splinterman's profile


23066 posts in 2778 days

#7 posted 09-15-2009 01:40 PM

Sweet looking board…......good job.

View Kent Shepherd's profile

Kent Shepherd

2715 posts in 2703 days

#8 posted 09-15-2009 03:15 PM

I’ll bet you don’t even own a straight-edge. (Just kidding)

I love it . Good job as usual


View jockmike2's profile


10635 posts in 3663 days

#9 posted 09-15-2009 04:25 PM

Very cool Larry, me like very much.

-- (You just have to please the man in the Mirror) Mike from Michigan -

View degoose's profile


7193 posts in 2771 days

#10 posted 09-15-2009 10:37 PM

I can’t even spell “srtaghit egde” what do it do???

-- Drink twice... and don't bother to cut... @ For lovers of all things timber...

View Woodwrecker's profile


3909 posts in 2992 days

#11 posted 09-16-2009 01:15 AM

U DA MAN… Mate!

-- Eric, central Florida

View huff's profile


2828 posts in 2702 days

#12 posted 09-16-2009 04:15 AM

Larry, I really like the smooth, graceful lines of this one. Quite different from your others. I gave up on straight lines a long time ago. Are we getting close to the 150 yet?

-- John @

View Napaman's profile


5508 posts in 3494 days

#13 posted 09-16-2009 05:39 AM

I can breathe….ahhhhhhh….I challenge myself by holding my breath between your project posts…and I was starting to get really red in the face…thank you for posting…


-- Matt--Proud LJ since 2007

View rrdesigns's profile


526 posts in 2603 days

#14 posted 09-16-2009 05:47 AM

You mentioned an arc cutting jig in your cutting board post. Is that jig referenced somewhere on the Lumberjocks site? Oops, never mind, I found it, and thanks!

-- Beth, Oklahoma, Rambling Road Designs

View Moron's profile


5032 posts in 3310 days

#15 posted 09-16-2009 06:01 AM

so what part is that?

-- "Good artists borrow, great artists steal”…..Picasso

showing 1 through 15 of 19 comments

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics