|Project by CharlieD||posted 09-14-2009 09:14 PM||4172 views||13 times favorited||22 comments|
This cabinet was made to fit under my workbench. It was build using plans from PlansNOW. Case is made with birch plywood trimmed in walnut. Drawers and door are oak. The plans called for spines to be used (which I did) to attached to walnut trim. This took quite a bit of work and I don’t think was necessary. I would suggest simply gluing and pin nailing the trim. Finished with Shellac and Poly.
-- Charlie - Texas