LumberJocks

Taper Jig for Tablesaw

  • Advertise with us
Project by KeithH posted 1772 days ago 2571 views 3 times favorited 2 comments Add to Favorites Watch

Making my first table. I needed a jig to taper 30” legs from 1 5/8 to 3/4 and came up with this design so I wouldn’t have to make another jig again in the future. Holes are predrilled to be able to move the clamps to the middle of the riser blocks or the other side of the riser blocks, giving a size range of 1/2”up to 3 1/4”.





2 comments so far

View Kindlingmaker's profile

Kindlingmaker

2654 posts in 2122 days


#1 posted 1772 days ago

A very nice looking jig and it looks very usable. Good job!

-- Never board, always knotty, lots of growth rings

View woodworm's profile

woodworm

14124 posts in 2187 days


#2 posted 1772 days ago

A very useful project for many more projects!

-- masrol, kuala lumpur, MY.

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase