Tardis Jewelry Box

  • Advertise with us
Project by TDSpade posted 01-06-2016 06:27 AM 1641 views 1 time favorited 3 comments Add to Favorites Watch

I built this Tardis jewelry box for my daughter in law, as a Christmas gift. It is made from Baltic birch plywood with some poplar for the base and part of the top.

It’s about 19 inches tall from the base to the top of the light. It has 6 drawers, 8 hooks to hang necklaces (4 on each side), and the top comes off for a top compartment. The base is 12½ by 11½ inches.

From start to finish it took about 2 months. After work and weekends. I didn’t start out with any plans So I tested out ideas with scrap plywood. I tried out about 6 different router pattern jigs, before I got one to suit me, just for routing out the panels.

-- For every expert, there is an equal and opposite expert.

3 comments so far

View hairy's profile


2783 posts in 3768 days

#1 posted 01-06-2016 12:41 PM

That’s a great piece of work!! It is bigger on the inside!

-- My reality check bounced...

View crsowa's profile


36 posts in 2227 days

#2 posted 01-06-2016 06:48 PM

very nice… had to make some for Xmas also….cutting boards though

-- Chris, Chef by day, wood worker by night... And most weekends...

View NormG's profile


6378 posts in 3240 days

#3 posted 01-07-2016 02:23 AM

Doctor WHO would be proud, you did a great job on this

-- Norman - I never never make a mistake, I just change the design.

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics