Finger Joint Sled

  • Advertise with us
Project by Andre posted 01-04-2016 05:34 PM 1752 views 5 times favorited 5 comments Add to Favorites Watch

Bought a Finger joint blade set from L.V. awhile back so needed to make a sled for it, Blades cut 1/4” and 3/8” so built the sled to cut both then I thought may as well do 1/2” too! Made from stuff kicking around in the shop. 1/2” BB base with Birch rails, 1/4” hardboard replaceable sliding kerf guides and the fingers are made from some scrap Jatoba flooring. With a little fine tuning it makes a very nice joint, practice board was some pine scraps.

-- Lifting one end of the plank.

5 comments so far

View ChrisK's profile


1863 posts in 2836 days

#1 posted 01-04-2016 05:56 PM

Nice, simple and effective.

-- Chris K

View Diggerjacks's profile


2194 posts in 2893 days

#2 posted 01-04-2016 06:04 PM


Very effective

Thanks for sharing

-- Diggerjack-France ---The only limit is the limit of the mind and the mind has no limit

View farmerdude's profile


632 posts in 1793 days

#3 posted 01-04-2016 09:37 PM

Nice sled. Looks like you’re all set up to make some boxes. Those are sure some tight fitting joints.

-- Jeff in central Me.

View majuvla's profile


10703 posts in 2622 days

#4 posted 01-05-2016 11:13 AM

I’m in the process of makeing one finger joint sled too, but for sinlge blade and you gave me some wonderful idea.

-- Ivan, Croatia, Wooddicted

View Pointer's profile


411 posts in 865 days

#5 posted 01-05-2016 01:29 PM

Nice looking sled. I need to make one of these for myself.

-- Joe - - When 10 million people believe in a dumb idea, it's still a dumb idea.

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics